NJC Equipment Hire Auckland has a range of Earthmoving machinery from 1T-20T+ Diggers, Tracked Bobcat Loaders, Tracked Mini Loaders, Tracked Dumpers and Compaction gear to suit any job. Need an excavator, dumper or tracked loader? Get in touch with our experts and talk about your requirements today.
Delivery Auckland Wide
1T MINI EXCAVATOR – ZERO TAIL SWING
NJC Equipment Hire is the first in NZ to receive the ultra compact 1T Kubota U10-5 mini excavator which sets the standard for excavators in its class, powered by a renowned Kubota engine, providing exceptional reliability and performance. Designed to operate safely in the tightest of spaces, the U10-5 features zero tail swing, hydraulic pilot controls, front foldable ROPS and variable track down to just 750mm width.
- All NJC excavators come with a rock bucket (toothed), spade bucket (trenching) and weed bucket (wide).
- Extra Attachments Available
- Our little diggers can come on NJC specialty excavator trailers if required. Please check your vehicle’s tow rating.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your compaction requirements today.
- Ideal in tight access areas
- Drainage
- Trenches
- Excavations
- Footings
- Services
- Zero swing tail for those tight spaces
- Adjustable track width: 990mm standard down to 750mm
- Foldable ROPS (From 2300mm to 1650mm high)
- Impressive digging depth of 1800mm
- Rubber tracks protect surfaces and ensure quiet travel.
- Side lever layout
- Excellent manoeuvrability
- Summary;
- Height: 2260mm w ROPS (2300mm with beacon)
- Folded Height: 1650mm
- Width: 990mm / 750mm
- Length: 2980mm
- Min Ground Clearance: 140mm
- Operating Weight: 1125kg
- Digging depth: 1800mm
- Engine: 10.1hp Diesel
- Fuel Capacity: 12L
- Engine Oil: 2.8L
- Hydraulic Oil Reservoir: 12.6L
- Hydraulic Oil System: 17.1L
- See attached PDF documents for full excavator specs, working range and operating manual
3 Buckets Supplied:
- Rock – 400mm
- Spade – 300mm
- Weed – 770mm
- Suitable protective clothing
- Suitable protective mask
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
1.7T MINI EXCAVATOR – ZERO TAIL SWING
NJC Equipment Hire Kubota U17-3 Mini excavators are perfect for tight of spaces thanks to its zero swing tail. Superior manoeuvrability and maximum digging performance for tackling drainage, trenches, services, pools, footings and so on. Rubber tracked to protect surfaces and reduce noise. This compact excavator delivers the power you need, the control you want and the smoothest performance when you need it most.
- All NJC excavators come with a rock bucket (toothed), spade bucket (trenching) and weed bucket (wide).
- Extra Attachments Available
- Our little diggers can come on NJC specialty excavator trailers if required. Please check your vehicle’s tow rating.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your compaction requirements today.
- Ideal in tight access areas
- Small to medium projects
- Drainage
- Trenches
- Pool excavations
- Footings
- Services
- Breaking concrete
- Drilling holes
- Zero swing tail for those tight spaces
- Rubber tracks protect surfaces and ensure quiet travel.
- Fitted with backfill blade for user convenience.
- Excellent manoeuvrability
- Adjustable track width: 1240mm standard (down to 990mm upon request)
- Attachments Available:
- Power head borer unit
- Augers: 200mm – 600mm
- Breaker unit
- Summary;
- Height: 2340mm
- Width: 990mm/1240mm
- Length: 3545mm
- Machine weight: 1650kg
- Digging depth: 2310mm
- See attached PDF for full excavator specs
3 Buckets Supplied:
- Rock – 450mm
- Spade – 300mm
- Weed – 920mm
Attachments Available:
- Borer Unit with Augers: 200mm – 600mm
- Breaker Unit
- 1.7T Excavator Grab Bucket
- Suitable protective clothing
- Suitable protective mask
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
3.5T EXCAVATOR – ZERO TAIL SWING
NJC Equipment Hire 3.5T Excavators are a class leading, offering more room in the enclosed cab (you’ll think you’re in a 5.5T) whilst combining superior power and outstanding versatility to tackle a wide variety of jobs and conditions. A mere 50mm Counterweight makes this a great machine for tight projects. Rubber tracked to protect surfaces and reduce noise.
- All NJC excavators come with a rock bucket (toothed), spade bucket (trenching) and weed bucket (wide).
- Extra Attachments Available
- Delivery Service Auckland Wide Available
Talk to our experienced team about your compaction requirements today.
- Zero swing for tight spaces
- Drainage
- Trenches
- Pool excavations
- Footings
- Services
- Civil
- Zero swing tail
- Rubber tracks protect surfaces and ensure quiet travel
- Backfill blade
- Excellent manoeuvrability
- User friendly controls
- Easily adjusted oil flow
- ROPS operator protection
- Summary;
- Weight: 3320 kg
- Dimensions: 4760 mm L x 1690 mm W x 2440 mm H
- Digging depth: 3186mm
- Lifting capacity: 590 kg @ max radius & 2.5m high over front blade down
- Fuel tank: 50L
- See attached PDF for full excavator specs
3 Buckets Supplied:
- Rock – 500mm
- Spade – 300mm
- Weed – 1220mm
Attachments Available:
- Borer Unit with Augers: 200mm – 600mm
- Breaker Unit
- Hearing protection
- Hard/safety hat is recommended
- DELIVERY AVAILABLE
- Suitable customer supplied transport
5.5T EXCAVATOR – ZERO TAIL SWING
NJC Equipment Hire 5.5T Excavators offer versatility, reliability and a compact and well balanced design, combining exceptional power to tackle any job and working condition with ease. Tight tail swing model with only a mere 65mm counterweight overhang makes this ideal in confined work areas. Rubber tracked to protect surfaces and reduce noise. Our 5.5T Kubota U55-4 diggers are a step up in power, size and reach from our 3.5T machines.
- All NJC excavators come with a rock bucket (toothed), spade bucket (trenching) and weed bucket (wide).
- Extra Attachments Available
- Delivery Service Auckland Wide Available
Talk to our experienced team about your compaction requirements today.
- Zero swing for tight spaces
- Drainage
- Trenches
- Pool excavations
- Footings
- Services
- Civil
- Zero swing tail
- Quality interior
- Rubber tracks protect surfaces and ensure quiet travel
- Hydraulic angle blade
- ROPS/FOPS operator protection
- Digging force of 4315kg
- Automatic high to low travel shift
- Minimal counterweight protrusion
- Summary;
- Weight: 5685 kg
- Dimensions: 5550mm L x 1960mm W x 2550mm H
- Digging depth: 3630mm
- Lifting capacity: 1.1T at 4m radius & 3m high over front blade down
- Fuel tank: 68L
- See attached PDF for full excavator specs
3 Buckets Supplied:
- Rock – 600mm
- Spade – 300mm
- Weed – 1550mm
Attachments Available:
- Borer Unit with Augers: 200mm – 600mm
- Breaker Unit
- Hearing protection
- Hard/safety hat is recommended
- DELIVERY AVAILABLE
- Suitable customer supplied transport
8.5T Excavator
NJC Equipment Hire 8.5T Excavators are an excellent mid sized machine for all types of jobs. It features a powerful 70HP DI engine and 3 pump load-sensing hydraulic system that powers through the toughest conditions. Luxury ROPS cab and clever features that ensure operator safety and increased productivity with this quality machine. Tight tail swing design means only 360mm counterweight overhang. Also rubber tracked to protect surfaces and reduce noise.
- All NJC excavators come with a rock bucket (toothed), spade bucket (trenching) and weed bucket (wide).
- Extra Attachments Available
- Delivery Service Auckland Wide Available
Talk to our experienced team about your compaction requirements today.
- Drainage
- Trenches
- Pool excavations
- Footings
- Services
- Civil
- Construction
- Roading
- Narrow 2200mm width
- Luxury interior
- Arm overload alarm
- Rubber tracks protect surfaces and ensure quiet travel
- High capacity dozer blade
- ROPS/FOPS operator protection
- Digging force of 6650kg & 3888kg arm force
- Summary;
- Weight: 8290 kg
- Dimensions: 6450mm L x 2200mm W x 2540mm H
- Digging depth: 4600mm
- Lifting capacity: 1.65T at 5m radius & 3m high over front blade down
- Fuel tank: 115L
- See attached PDF for full excavator specs
3 Buckets Supplied:
- Rock – 700mm
- Spade – 300mm
- Weed – 1650mm
Attachments Available:
- Borer Unit with Augers: 200mm – 600mm
- Hearing protection
- Hard/safety hat is recommended
- DELIVERY AVAILABLE VIA 3RD PARTY TRANSPORT
- Suitable customer supplied transport
12T and up – Excavators
Please talk with our team if you are looking for Excavators from 12T and up.
Conditions Apply.
DUMPER – TRACKED 1T CONCRETE DUMPER – PETROL
NJC Hire Tracked Pedestrian Pivoting Concrete Dumpers have a superb 1T / 0.41m3 load capacity, pivoting bin and excellent manoeuvrability, coupled with the 4-stroke petrol engine making this a great machine for tight access earthmoving and landscaping jobs. The poly bin is suited for transporting wet concrete, soils and landscaping materials in and out of the most inaccessible job sites, efficiently and safely.
- NJC Hire Mini Dumpers can come on NJC specialty trailers. If collecting yourself, please ensure you have a suitable vehicle and towbar rating to tow with.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving requirements today.
- Concrete jobs
- Earthmoving
- Landscaping
- Tight access jobs
- Moving materials efficiently over all types of terrain
- 4 Stroke Petrol (Unleaded 91)
- 950kg / 0.41m3 Bin capacity
- 90° Pivoting bucket
- Poly Bin for concrete carrying
- Time saving; fast, efficient and safe loading and unloading
- Compact; at only 900mm width for tight access
- Tight turn circle on its own footprint
- Low centre of gravity for safe stable loading and transport
- Safely handles inclines, hills and loose surfaces with rubber tracks
- Folding foot plate
- Fuel: 4 Stroke Petrol (Unleaded 91)
- Machine Dimensions (LxWxH): 2.69m L x 0.89m W x 1.37m H
- Net Weight: 739kg
- Engine: Honda GX690 Air-Cooled V-Twin OHV
- Displacement 688cc
- Fuel Tank Capacity 20L
- Starter System Electric
- Oil Capacity 1.5L
- Travel Speed: 0 – 9.6km per hour
- Bin Load Capacity: 950kg / 0.41m3
- Bin Dimensions (Inner): 1.295m L x 0.765m W x 0.54m H
- Dump Angle 90°
- Drive System: Hydrostatic
- Tracks: Heavy Duty Rubber
- Track Contact Length 0.96m
- Tracks Gauge 0.7m
- Ground Clearance 0.12m
- Operator Platform: Foldable Foot Plate
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
DUMPER – TRACKED HI-TIP PEDESTRIAN – PETROL
NJC Hire Tracked Mini Dumpers are small and nimble with superb load capacity and excellent manoeuvrability, Coupled with the efficient 4-stroke petrol engine making this a great machine for tight access earthmoving and landscaping jobs. Perfect for getting soil and materials in and out of the most inaccessible job sites, efficiently and safely. The high tipping bucket is ideal for backfilling over retaining walls and unloading into trailers and small trucks.
- NJC Hire Mini Dumpers can come on NJC specialty trailers. If collecting yourself, please ensure you have a suitable vehicle and towbar rating to tow with.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving requirements today.
- Earthmoving
- Landscaping
- Tight access jobs
- Moving materials efficiently over all types of terrain
- Tipping over high retaining walls / skips / trailers / trucks
- 4 Stroke Petrol
- Large 0.36m3 capacity
- Hi Tipper function – 1.45m safe bucket tipping height
- Time saving; fast, efficient and safe loading and unloading
- Compact; at only 810mm width for tight access
- Tight turn circle on its own footprint
- Low centre of gravity for safe stable loading and transport
- Pivoting track rollers for smooth even transport over rough terrain
- Safely handles inclines, hills and loose surfaces with rubber tracks
- Folding foot plate
- Machine Dimensions: L 1926mm x W 835mm x H 1336mm
- Engine: 13hp Honda
- Fuel: 4 Stroke Petrol (Unleaded 91)
- Travel Speed: 5.5km per hour
- Load Capacity: 500kg / 0.36m3
- Net Weight: 668kg
- High Tip Bucket: 1.45m Tipping Height
- Bucket Dimensions: L 1150mm x W 810mm x H 375mm
- Drive System: Hydrostatic
- Tracks: Heavy Duty Rubber with Seesaw Roller
- Operator Platform: Foldable Foot Plate
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
DUMPER – TRACKED SELF LOADING PEDESTRIAN – PETROL
NJC Hire Tracked Self Loading C85ACW Dumpers have the ability to load without leaving the back of the machine. The self loading mechanism is invaluable and saves you time, money and effort when tackling jobs. Small and nimble with excellent manoeuvrability, coupled with the efficient 4-stroke petrol engine make this a great machine for tight access earthmoving and landscaping jobs. Note: Bicket not to be used for digging.
- NJC Hire Mini Dumpers can come on NJC specialty trailers. If collecting yourself, please ensure you have a suitable vehicle and towbar rating to tow with.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving requirements today.
- Landscaping
- Tight access jobs
- Earthmoving
- Moving materials efficiently
- Mulch
- Sand
- Fines
- Compost
- Large capacity bin
- Self Loading Scoop for efficient loading of Mulch, Compost, Fines and Sand
- Time saving; fast, efficient and safe loading and unloading
- Compact; at only 835mm width (Bucket) for tight access
- Tight turn circle on its own footprint
- Low centre of gravity for safe stable loading and transport
- Pivoting track rollers for smooth even transport over rough terrain
- Safely handles inclines, hills and loose surfaces with rubber tracks
- Folding foot plate
- Machine Dimensions: L 1926mm x W 835mm x H 1336mm
- Engine: 13hp Honda
- Fuel: 4 Stroke Petrol (Unleaded 91)
- Travel Speed: 5.5km per hour
- Load Capacity: 500kg
- Net Weight: 668kg
- Bucket Dimensions: L 1150mm x W 810mm x H 375mm
- Drive System: Hydrostatic
- Tracks: Heavy Duty Rubber with Seesaw Roller
- Operator Platform: Foldable Foot Plate
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
TRACKED MINI LOADER
Work smarter, not harder with NJC Equipment Hire Tracked Mini Loaders. Ideal for a range of earthmoving, landscaping and construction applications in narrow or limited access sites. Rubber tracks provide greater traction on rough or uneven surfaces and with the option of a range of attachments, including post hole borer and trencher, turn this mini loader into a multi-purpose workhorse. Easy to use, rugged and reliable with a small footprint making them a great addition to any landscaping job, construction site or DIY project. Use in combination with the C85 Mini Dumper.
- NJC Hire Tracked Mini Loaders come with 4 in 1 Bucket
- Attachments available
- NJC Hire Mini Loaders can come on NJC specialty trailers. If collecting yourself, please ensure you have a suitable vehicle and towbar rating to tow with.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving requirements today.
- Moving and levelling soil, mulch, sand, screenings and rubble
- Trenching
- Drilling holes
- Construction
- Civil
- Landscaping
- Note: Not to be used for digging or scraping existing turf or hardened soil/clay
- If top layers of soil need removing, please talk to our team about our excavators.
- Easy to operate with single, pilot operated joystick
- Powerful & compact
- Rubber tracks increase capability on uneven ground
- Versatile and easily transportable on trailer
- A range compatible attachments (see attachments tab)
- Weight: 1,265 kg
- Engine: 1300cc diesel 18.5 kW (24.8 hp)
- Track Width: 24.1 cm
- Wheelbase: 104.1 cm
- Fuel Capacity: 41.64 litres
- Ground Speed: 7.6 km/h
- 4 in 1 Bucket Width: 1250mm
- Dimensions: L 2560mm x W 1029mm (1250mm Bucket) x H 1381mm
- Maximum Operating Height: 267.2 cm
- Hinge Pin Height: 206 cm
- Dump Height: 154.9 cm
- Dump Angle: 40-degrees
- Reach – Fully Raised: 62.5 cm
- Tip Capacity: 1,296 kg
- Rated Operating Capacity (35% of Tip Capacity): 454 kg
Mini Loader Attachments:
- 4 in 1 bucket:
- Bucket Width 1250mm
- Soil levelling, scraping (up to 200mm deep), bite and bucket work
- Post hole digging up to 600mm in diameter
- Augers 150mm – 600mm
- Trencher attachment:
- 900mm Max Depth x 150mm Width
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
TRACKED BOBCAT T450 LOADER
NJC Hire Bobcat T450 Tracked Loader is perfect around tight worksites with its powerful performance for earthmoving and landscaping jobs. Rubber tracks, easy to operate controls and ROPS cockpit make this machine quality performer for your next project.
- NJC Tracked Bobcat Loaders come with 4 in 1 Bucket
- Attachments available
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving requirements today.
- Drilling holes
- Trenching
- Moving pallets with forks attachment
- Road sweeping
- Agriculture & farming
- Construction
- Civil
- Landscaping
- Moving and levelling soil, mulch, sand, screenings and rubble
- Loading trailers, trucks and bins
- Easy to operate
- Compact dimensions
- ROPS operator safety High lift capacity
- Tracks increase capability on uneven ground
- Oil pressure warning lights
- A range compatible attachments (see attachments tab)
- Operating weight: 2789kg
- Dimensions: L 3216mm x W 1397mm (1550mm Bucket) x H 1976mm
- Tipping load (ISO 14397-1): 1,900 kg
- Rated operating capacity (no more than 35% of Tipping Load): 665 kg
- Pump capacity 63 L/min
- System relief at quick couplers: 22.4 – 23.1MPa
- Max. travel speed: 11.7 km/h
- Max. travel speed (high range – optional): 17.7 km/h
- Fuel: Diesel
- Power at 2600 RPM (SAE J1995): 46.2 kW
- Torque at 1800 RPM (SAE J1995 Gross): 225Nm
- Displacement: 2393 cm3
- Fuel tank: 65.5L
Bobcat T450 Attachments:
- 4 in 1 Bucket:
- Soil levelling, scraping (up to 200mm deep), bite and bucket work
- Borer Attachment:
- Post hole digging up to 600mm in diameter
- Augers 150mm – 600mm
- Pallet Forks
- Sweeper
- Trencher:
- 1200mm Max Depth x 150mm or 300mm Width
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- Suitable customer supplied transport
TRACKED BOBCAT T590 LOADER
NJC Hire T590 Bobcat Tracked Loader is a diesel powered, rubber tracked machine ideal for earthmoving, landscaping and site clean up. Tracks increase stability and minimise terrain damage. It has the highest lifting height in the 500 series: perfect for loading materials fast. Easy to operate. Full Roll Over Protection (ROPs) canopy for operator safety.
- NJC Tracked Bobcat Loaders come with 4 in 1 Bucket
- Attachments available
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving requirements today.
- Moving and levelling soil, mulch, sand, screenings and rubble
- Loading trailers, trucks and bins
- Drilling holes
- Trenching
- Moving pallets with forks attachment
- Road sweeping
- Agriculture & farming
- Construction
- Civil
- Landscaping
- Larger more powerful machine than the T450
- Longer reach and height
- Easy to operate
- Compact dimensions
- ROPS operator safety High lift capacity
- Tracks increase capability on uneven ground
- Oil pressure warning lights
- A range compatible attachments (see attachments tab)
- Operating weight: 3,548 kg
- Dimensions: L 3378mm x W 1727mm (1875mm Bucket) x H 1972mm
- Tipping load (ISO 14397-1): 2,774 kg
- Nominal flow rate (ISO 14397-1): 971 kg
- Pump capacity: 64.7L / min
- Pump capacity (with high flow option): 101.1 L / min
- Draining the system in correspondence with quick couplings: 23.8-24.5 MPa
- Maximum travel speed (high range – optional): 16.7 km / h
- Fuel: Diesel
- Power: 49.2 kW
- Torque at 1,500 rpm (SAE J1995 gross): 245Nm
- Number of cylinders: 4
- Displacement: 2,392 cm3
- Fuel tank: 138.2L
Bobcat T590 Attachments:
- 4 in 1 Bucket:
- Soil levelling, scraping (up to 200mm deep), bite and bucket work
- Borer Attachment:
- Post hole digging up to 600mm in diameter
- Augers 150mm – 600mm
- Trencher:
- 900mm Max Depth x 150mm or 300mm Width
- Pallet Forks
- Sweeper
- Dozer Blade: T590 Only
- Harley Rake: T590 Only
- Perfect for seedbed preparation, site clean up, rejuvenating old turf, reconditioning hard soil, trench restoration, levelling, windrowing debris, drying out muddy sites, site preparation and blending materials.
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- Suitable customer supplied transport
1.6T REMOTE TRENCH ROLLER
NJC Hire 1.6T Remote Trench Rollers offer high performance, remote controlled operation for use on base layer such as clay and soils delivering optimal results for trenches, retaining walls, pipeline and drainage construction, foundations, paths or where safety of operators is a concern. High centrifugal force combined with the kneading effect of the ‘sheepsfoot’ drums enables maximum performance when compacting cohesive soils. The simple to use UHF remote control with auto cut when the machine is too close, or far from the operator allows safe operation whilst UHF ensures no interference with signal on job sites like many infrared systems.
- NJC Hire 1.6T rollers can come on NJC specialty trailers. If collecting yourself, please ensure you have a suitable vehicle and towbar rating to tow with.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving & Compaction requirements today.
- Trenches
- Foundations
- Drainage
- Clay
- Soils
- Roading
- Parking lots
- Sub bases
- Easy to use UHF remote operation (less interference)
- Machine will switch to idle if distance from remote is greater than 20m, closer than 2m or if remote isnt being used
- Safe operation in tight spaces such as trenches or where fumes are present.
- Narrow 820mm width sheepsfoot drums
- Multiple compaction settings with high centrifugal compaction force
- Perfect for clay or wet soils where traditional compactors would be unsuitable
- Articulated steering increases manoeuvrability
- Towable on our NJC specialty machine trailers (1,628kg operating weight)
- Engine: Diesel Kubota D1005
- Fuel Tank: 24L
- Weight: 1.628T
- Length: 2018mm
- Width: 820mm
- Height: 1300mm
- Travel Speed: 1.7 km/h operating – 3.1 km/h max
- Frequency: 42Hz
- Compaction Force: High Amplitude 73kN / Low 36kN
- Engine Power: 24hp
- Cooling: Water
- Drive: Hydrostatic
- Steering: Articulated joint
- Incline Capacity: 55% (soil dependent)
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- DELIVERY AVAILABLE
- NJC specialty trailer or equivalent customer supplied trailer is required
- A suitable towing vehicle
- Refer to your vehicle manufacturer tow rating
- Towing Capacity
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
1.6T ROLLER – SMOOTH DOUBLE DRUM
NJC Hire Auckland Smooth Drum 1.6T Rollers offer full-flush compaction on the right and on the left, double traction and double vibration at front and rear. No wheel supports to obstruct compaction work up against kerbs and walls. Pressurised water sprinkler system and more.
- NJC Hire 1.6T rollers can come on NJC specialty trailers. If collecting yourself, please ensure you have a suitable vehicle and towbar rating to tow with.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving & Compaction requirements today.
- Roading
- Asphalt
- Sand
- Soil
- Gravel
- Driveways
- Flush finish on asphalt/kerbing
- Double traction
- Dual vibration
- Comfortable driver position
- Easy to use controls
- Articulated steering increases manoeuvrability
- Pressurised water sprinkler system
DYNAPAC CC900 PLUS
- Max. Operating Mass: 1665 kg
- Operating Mass: 1600 kg
- Water Tank: 190 L
- Vibration Freq: 70 Hz
- Centrifugal Force: 17 kN
- Nominal Amplitude: 0.4 mm
- Static Linear Load (Front/Rear): 8.3/9.4 kg/cm
- Module Mass (front/rear): 750 kg/ 850 kg
- W 970 mm x L 2040 mm x H 2300 mm Incl ROPS
- Compaction Width: 900 mm
- Wheelbase: 1350 mm
- Curb Clearance: 465 mm
- Drum Diameter: 584 mm
- Ground Clearance: 255 mm
- Overhang R&L: 35 mm
- Turning Radius: Outside: 2810 mm
- Drum Shell Thickness: 13 mm
- Steering Angle: ±34°
- Speed Range: 0-9 km/h
- Vertical Oscillation: ±13°
- Max. Theoretical Gradeability: 40 %
- Engine: Kubota D1105-E4B T4f Water Cooled Diesel Engine 18 kW (24 hp) @ 2800 rpm
- Fuel Tank Capacity: 23 L
- Vibration: Gear pump/motors with constant displacement.
- Steering: Gear pump with constant displacement.
- Service Brake: Hydrostatic in forward and revers lever.
- Parking/Emergency Brake: Fail safe multi disc brake in both drums
- Sprinkler Timer / Back Up Alarm / Foldable ROPS / Seat Belt / Larger Water Tank / Beacon
- Comfort Seat / Cup Holder / Work Lights / Dual Forward Rev Controls / Vibe Shut Off
AMMANN ARX16
- Operating Weight: 1,655 kg
- Drum width: 900 mm
- Roller compaction width (offset): 947 mm
- Water tank: 110L
- Diesel Tank: 26 L
- Transport length: 2.017 m
- Transport width: 0.947 m
- Transport height: 1.8 m
- Steering: SL
- Travel speed: 8 km/h
- Gradient with vibe / without: 30/40%
- Frequency: 58/66 Hz
- Rollers Ø: 0.575 m
- Turning radius outside: 2.125 m
- Statical line load: 8.4 kg/cm
- Centrifugal force: 23 kN
- Engine type: Yanmar 3TNV76
- Engine power: 15 kW
- Displacement: 1.115L
- Revolutions at max torque: 2500 rpm
- Suitable protective clothing
- Suitable protective mask
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- DELIVERY AVAILABLE
- Supplied with optional NJC specialty trailer
- Suitable customer supplied transport
- A suitable towing vehicle
- Towing capacity:
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
4T ROLLER – SMOOTH DOUBLE DRUM
NJC Equipment Hire 4T vibrating rollers are designed for roading, construction and landscaping. Very efficient and effective machines for blacktop compaction and for compacting unbonded base layers. With dual vibrating and driving drums, our units have excellent compaction capacity on surfaces including soil, gravel and other varying subgrades.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving & Compaction requirements today.
- Roading
- Asphalt
- Subgrade layers
- Sand
- Soil
- Driveways
- Flush finish on asphalt/kerbing
- Double traction
- Dual drum vibration
- Comfortable driver position
- Easy to use controls
- Capacity to follow small asphalt paver
- Articulated steering increases manoeuvrability
- Pressurised water sprinkler system
DYNAPAC CC1300V1
- Max. Operating Mass: 4800 kg
- Operating Mass: 3900 kg
- Water Tank: 298 L
- Vibration Freq: 54/61 Hz
- Centrifugal Force (High/Low): 38/21 kN
- Nominal Amplitude (High/Low): 0.5/0.2 mm
- Static Linear Load (Front/Rear): 14.3/15.7 kg/cm
- Module Mass (front/rear): 1855 kg/ 2045 kg
- W 1425 mm x L 2850 mm x H 2855 mm (w/o ROPS: 2025 mm)
- Compaction Width: 1300mm
- Wheelbase: 1970 mm
- Curb Clearance: 690 mm
- Drum Diameter: 880 mm
- Ground Clearance: 190 mm
- Width Offset: 50 mm
- Overhang R&L: 62.5 mm
- Turning Radius: Outside: 4330 mm / Inside: 3030 mm
- Drum Shell Thickness: 16 mm
- Steering Angle: ±30°
- Speed Range: 0-9 km/h
- Vertical Oscillation: ±10°
- Max. Theoretical Gradeability: 42 %
- Engine: Kubota V2203-M (IIIA) Water Cooled Diesel Engine 35 kW (48 hp) @ 2700 rpm
- Fuel Tank Capacity: 60L
- Driving: Axial piston pump with variable displacement. Radial piston motors (2) with constant displacement.
- Vibration: Gear pump/motors with constant displacement.
- Steering: Gear pump with constant displacement.
- Service Brake: Hydrostatic in forward and revers lever.
- Parking/Emergency Brake: Fail safe multi disc brake in both drums
AMMANN ARX40
- Operating weight: 4450 kg
- Drum width: 1300 mm
- Roller compaction width (offset): 1340 mm
- Water tank: 350 L
- Diesel Tank: 57 L
- Transport length: 2.8m
- Transport width : 1.341m
- Transport height: 2.332m
- Steering: VL
- Travel speed: 10km/h
- Frequency: 45/57Hz
- Rollers Ø: 0.85m
- Turning radius outside: 2.581m
- Statical line load: 15.8kg/cm
- Centrifugal force: 52kN
- Engine type: Yanmar 4TNV88
- Engine power: 30kW
- Displacement: 2.189L
- Revolutions at max torque: 2400rpm
- Suitable protective clothing
- Suitable protective mask
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- DELIVERY AVAILABLE
- Suitable customer supplied transport
6T PADFOOT ROLLER
Padfoot rollers are perfect for compacting fine grained soils such as heavy or silty clays in embankments, subgrade layers in pavements and rail road construction and roading projects. Pad foot rollers are designed for drying, crushing and kneading materials to eliminate water and air void. 3-point articulation for outstanding traction and off-road mobility. Simple, intuitive with high climbing ability and a compact dimension.
- Delivery Service Auckland Wide Available
Talk to our experienced team about your Earthmoving & Compaction requirements today.
- Gravel
- Soil
- Subgrade materials
- Eliminate water and air void in material
- Pad foot drums ideal for drying, crushing and kneading surface materials
- Excellent operator visibility from cockpit
- 3-point articulation for outstanding traction and off-road mobility
- Simple, intuitive and language-neutral operation
- Excellent view of the machine and the construction site
- High climbing ability
- Compact dimensions
- Dimensions: L4040mm x W 1500mm x H 2867mm
- Drum: W 1370mm
- Height of the padfeet: 80mm
- Weight: 5.155T
- Ground clearance: 270mm (centre)
- Turning radius: 3375mm (inside)
- Angle of driving slope: ° 43 front /36 rear
- Vibration frequency: 30Hz
- Amplitude: 1.45mm
- Centrifugal force: 69kN
- Speed:
- working gear: 0-6km/h
- Transportation gear: 0-12.05km/h
- Climbing ability: vibration 55% on / 60% off
- Engine: KUBOTA V3307-CR-T
- Power rating: 55.4kW / 74.2HP / 2200rpm
- Emission standard: EU Stage V / EPA Tier 4
- Exhaust gas after-treatment: DOC-DPF
- Noise: 104dB
- Suitable protective clothing
- Suitable protective mask
- Suitable eye protection
- Hearing protection
- Hard/safety hat is recommended
- Protective gloves
- DELIVERY AVAILABLE
- Suitable customer supplied transport
