10” Pole Chainsaw – Cordless (250mm)

NJC Equipment Hire has a large range of chainsaws for hire. The cordless telescopic Pole Chainsaw is perfect for working at height in various environments including noise-sensitive residential areas. These 36V battery powered saws are so quiet that the user doesn’t even need to wear hearing protection.

  • Includes:
  • a new chain with every hire.
  • 2 x 36V Lithium ion batteries with under 10min charge time.
  • Trade & DIY landscaping
  • Around noise sensitive urban areas
  • Pruning high branches up to 5m from the ground
  • Every hire;
    • New chain
    • Supplied with chain oil
    • 2 x Quick charge 36-volt Stihl Lithium-Ion battery
  • Self-lubricating cutting chains
  • Extendable from 2.7 – 3.9m making 5m branches accessible from the ground
  • Lightweight and easy to use
  • Quiet
  • Safety brake
  • Zero exhaust emissions
  • Bar size: 10″ (250mm)
  • Weight: 5kg
  • Rated voltage: 36V
  • Run time (w/AP 300): Up to 50 mins
  • Noise: 92dB
  • Suitable eye protection
  • Hard/safety hat is recommended
  • Protective gloves
  • Safety chaps
  • Suitable footwear
  • Ute or station wagon required
Call 0800 652 555

Delivery Service Available

12” Pruning Saw – Cordless (300mm)

NJC Equipment Hire 12″ Pruning Saw is very lightweight and efficient for trimming and pruning branches in noise-sensitive areas. Thanks to its powerful engine, the Stihl MSA161T also accelerates very rapidly and delivers fine, extremely precise cutting.

  • Includes:
  • a new chain with every hire.
  • 2 x 36V Lithium ion batteries with under 10min charge time.
  • Trade & DIY Landscaping
  • Noise sensitive areas
  • Pruning
  • Trimming
  • Every hire;
    • New chain
    • Supplied with chain oil
    • 2 x Quick charge 36-volt Stihl Lithium-Ion battery
  • Self-lubricating cutting chains
  • Lightweight and easy to use
  • Quiet
  • Safety brake
  • Zero exhaust emissions
  • Quick clamping system
  • Bar size: 12″ (300mm)
  • Weight w/o battery: 2.1kg
  • STIHL saw chain pitch:  1/4″ P
  • Run time (w/AP 300): Up to 50 mins
  • Noise: 94dB
  • Rated voltage: 36V
  • Chain Oil Capacity: 105cc
  • Suitable eye protection
  • Hard/safety hat is recommended
  • Protective gloves
  • Safety chaps
  • Suitable footwear
  • Will fit in the boot of your car
Call 0800 652 555

Delivery Service Available

12” Chainsaw – Petrol (300mm)

NJC Equipment Hire 12″ Petrol Chainsaws are light with low-vibration, great for cutting firewood, building work and felling small trees. As a result of the 2-MIX engine the MS 181 consumes up to 20% less fuel and produces up to 70 % less emissions compared with 2-stroke engines of the same power output without 2-MIX technology. A smart choice!

  • Includes a new chain with every hire.
  • Lopping branches
  • Cutting firewood
  • Building work
  • Every hire;
    • New chain
    • 5L fuel can
    • Chain oil
  • Powerful 2 stroke engine
  • Self-lubricating cutting chains
  • Lightweight and easy to use
  • Safety brake
  • Motor: 2-Stroke Fuel
  • Bar Length: 300 mm
  • Displacement: 31.8cc
  • Power output: 2 bhp
  • Power-to-weight ratio: 9 kg/kW
  • Weight: 4.3 kg
  • STIHL Oilomatic saw chain pitch: 3/8 ” P
  • Suitable eye protection
  • Hearing protection
  • Hard/safety hat is recommended
  • Protective gloves
  • Safety chaps
  • Suitable footwear
  • Will fit in the boot of your car
Call 0800 652 555

Delivery Service Available

18” Chainsaw – Petrol (450mm)

NJC Equipment Hire 18″ Petrol Chainsaws are robust and powerful saws for professionals or experienced DIYers. Perfect for working in medium density forests, cutting firewood, tree lopping and trimming, firewood and construction.

  • Includes a new chain with every hire.
  • Professional
  • DIY
  • Farming
  • Lopping branches
  • Cutting firewood
  • Construction
  • Every hire;
    • New chain
    • 5L fuel can
    • Chain oil
  • Powerful 2 stroke engine
  • Self-lubricating cutting chains
  • Lightweight and easy to use
  • Safety brake
  • Bar size: 18″ (450 mm)
  • Weight: 7.5 kg
  • Motor: 2-Stroke Fuel
  • STIHL Oilomatic saw chain pitch: 3/8 ” (9.5mm)
  • Displacement: 59cc
  • Power output: 4.8 bhp
  • Power-to-weight ratio: 1.6 kg/kW
  • Suitable eye protection
  • Hearing protection
  • Hard/safety hat is recommended
  • Protective gloves
  • Safety chaps
  • Suitable footwear
  • Will fit in the boot of your car
18″ Chainsaw Brochure18″ Chainsaw ManualCall 0800 652 555

Delivery Service Available

36V STIHL Cordless Gear

NJC Equipment Hire has you covered! Whether you’re a hobby gardener or a professional, our Stihl Pro Cordless power system has even more power to get right down to work. This high-quality powerful range has tools for trimming hedges, mowing lawns, tidying lawn edges, removing leaves, clearing paths and cutting wood. The Stihl 36V lithium ion batteries can be used in all tools within our range.

Get in touch with our team to hire today!

  • Hedge Trimmer
  • Pole Hedge Trimmer
  • Leaf Blower
  • Lawn Mower
  • Pole Chainsaw
  • Pruning Saw
  • Weedeater
  • DIY
  • Professionals
  • Trimming hedges
  • Mowing lawns
  • Tidying lawn edges
  • Removing leaves
  • Clearing paths
  • Cutting wood
  • Pruning
  • Removing branches at height
  • Suitable protective clothing is required
  • Suitable eye protection is required
  • Protective gloves are required
  • Suitable footwear
  • Safety chaps (Saws)
  • Will fit in the boot of your car;
    • Leaf Blowers
    • Hedge Trimmers
    • Pruning Saw
  • Will fit in your Station wagon;
    • Lawn mowers
    • Weed Eaters
    • Telescopic hedge trimmers
    • Telescopic Pole chainsaws
Stihl 36V Range BrochureCall 0800 652 555

Delivery Service Available

CHIPPER – 100MM / 4IN

NJC Equipment Hire makes chipping and mulching a breeze with our powerful 16hp C21 Towable Chippers. Recycle branches (up to 100mm diameter), shrubs and leaves, then reapply to your garden as mulch/wood chips. Lightweight and easily manoeuvred around the yard to get the job done fast.

*Please Note: No Flax, Bamboo, Cabbage Tree, Toi Toi  Palms or Rubbish

  • Extra charges may apply for misuse.
  • Domestic or trade applications
  • Tree branches and pruning’s
  • Re-use and recycle your garden pruning’s, scrubs and leaves
  • Chip branches up to 100mm / 4in diameter
  • Light and easy to move around the yard
  • Towable
  • Powerful self-feeding 100mm chipping capacity
  • Fast and efficient at turning branches into wood chips/mulch
  • Manual clutch for easy starting
  • Belt-drive for smooth running and protection against shock load
  • Large infeed chute allows full branches to flow into the machine. No pre-cutting necessary
  • Rotating outlet chute for 360° discharge with deflector. The positive locking system requires no tools
  • Chipping Capacity: 100mm / 4in
  • Dimensions: H: 200cm x Width 130cm x Length 230cm
  • Weight: 420kg
  • Engine: Honda 21hp GX630 V-Twin
  • Start Up: Electric
  • Fuel: 4 Stroke – Petrol
  • Fuel Tank: 11L
  • Knives: 200mm x 80mm x 12mm A8 modified tool steel
  • Manual soft start: To avoid engine shock
  • Twin Belt Drive: Yes
  • Anvil: Case hardened
  • Disc size: 650mm x 20mm
  • Intake chute: 220mm x 300mm
  • Towing Kit: 50mm & 1 7/8in coupling
  • Suitable eye protection is required
  • Hearing protection is required
  • Protective gloves are required
  • Suitable Footwear
  • Towable / Tow bar required
NJC Chipper LoRes CC
NJC Hire C21 Chippers square
Hansa Chipper CatalogueChipper C21 ManualCall 0800 652 555

Delivery Service Available

DUMPER – TRACKED MINI PEDESTRIAN (HI-TIP)

NJC Tracked Mini Dumpers are small and nimble with superb 800kg load capacity and excellent manoeuvrability, making this a great machine for tight access earthmoving and landscaping jobs. Perfect for getting soil and materials in and out of the most inaccessible job sites, efficiently and safely. The high tipping bucket is ideal for backfilling over retaining walls and unloading into trailers and small trucks.

  • Landscaping
  • Tight access jobs
  • Earthmoving
  • Moving materials efficiently
  • Tipping over high retaining walls / skips / trailers / trucks
  • Large 800kg capacity
  • Hi Tipper function – 1.45m safe bucket tipping height
  • Time saving; fast, efficient and safe loading and unloading
  • Compact; at only 810mm width for tight access
  • Tight turn circle on its own footprint
  • Low centre of gravity for safe stable loading and transport
  • Pivoting track rollers for smooth even transport over rough terrain
  • Safely handles inclines, hills and loose surfaces with rubber tracks
  • Folding foot plate
  • Machine Dimensions: L 1926mm x W 835mm x H 1336mm
  • Engine: 13hp Honda 4 Stoke Petrol
  • Travel Speed: 5.5km per hour
  • Load Capacity: 800kg
  • Net Weight: 668kg
  • High Tip Bucket: 1.45m Tipping Height
  • Bucket Dimensions: L 1150mm x W 810mm x H 375mm
  • Drive System: Hydrostatic
  • Tracks: Heavy Duty Rubber with Seesaw Roller
  • Operator Platform: Foldable Foot Plate
  • Suitable eye protection is required
  • Hearing protection is required
  • Protective gloves are required
  • Suitable Footwear
  • Trailer or truck required for transport
  • We can deliver – Call the team on 0800 652 555
NJC Hire Cormidi C85 Tracked Pedestrian Dumper
NJC Hire Cormidi C85 Tracked Pedestrian Dumper Tipper
Mini Dumper C85-BrochureMini Dumper C85 ManualCall 0800 652 555

Delivery Service Available

Log Slitter – 14HP Vertical Hydraulic

NJC Equipment Hire Vertical Hydraulic Log Splitter is the business. We say, ‘If you can lift it, it will split it!’ New safety features include the two-handed protected control levers which require both hands to be on the controls during the splitting stroke and its return. The work table area has also been increased to hold more rounds and/or split wood, and the support legs give a stable working platform.

  • Professional
  • DIY
  • Farming
  • Splitting wood
  • 14 HP OHV
  • Towable
  • Reliable and Safe
  • Powerful & Efficient
  • Large work table
  • Heavy duty construction
  • New health & safety compliant unit
  • 14 HP OHV
  • Trailerised design
  • Two stage hydraulic pumps
  • Automatic kick out on return control valves
  • Lights
  • Large work table
  • Heavy duty construction
  • Gusseted U beam
  • Adjustable wear guides
  • Aluminium oil tanks
  • High speed ball bearing hubs
  • Hot dipped galvanised
  • Fully sprung trailer units
  • New health & safety compliant unit
  • Suitable eye protection
  • Hearing protection
  • Hard/safety hat with face protector is recommended
  • Protective gloves
  • Suitable footwear
  • Suitable clothing
  • Ensure loose clothing and hair is kept away from moving parts
  • Towable / Tow bar required
Vert Log Splitter ManualCall 0800 652 555

Delivery Service Available

Lawn Roller

If you’re looking for that perfect lawn, a lawn roller could be your answer. It’s one of the best and easiest ways to make your lawn look great. After a long winter a roller levels out your lawn, removing all the bumps and depressions that have naturally occurred. A roller is also good for new soil and freshly seeded lawns because it flattens the soil to promote stronger root growth.

  • Lawns
  • Preparing turf
  • Rolling turf
  • Push/Tow Lawn Roller
  • Easy to use
  • Light for transportation when empty
  • Versatile push /tow design allows for rolling both tight spaces and open areas
  • 105 Litre capacity poly drum won’t dent or rust.
  • Rounded drum ends ensure a smooth turn without damaging lawn
  • Push/Tow Lawn Roller
  • Versatile push /tow design allows for rolling both tight spaces and open areas
  • 105 Litre capacity poly drum won’t dent or rust.
  • Rounded drum ends ensure a smooth turn without damaging lawn
  • Dry Weight: 18kg
  • Weight with Water Ballast: 122kg
  • Protective gloves
  • Suitable footwear
  • A station-wagon or ute is required
Call 0800 652 555

Delivery Service Available

MINI LOADER TRACKED SKID STEER

Work smarter, not harder with NJC Equipment Hire Tracked Skid Steer Mini Loaders. Ideal for a range of landscaping, earthmoving and construction applications in narrow or limited access sites. Rubber tracks provide greater traction on rough or uneven surfaces and with the option of a range of attachments, including post hole borer and trencher, turn this mini loader into a multi-purpose workhorse. Easy to use, rugged and reliable with a small footprint making them a great addition to any landscaping job, construction site or DIY project. Use in combination with the C55 Mini Dumper.

Attachments Available

  • Landscaping
  • Moving and levelling soil, mulch, sand, screenings and rubble
  • Trenching
  • Drilling holes
  • Construction
  • Civil
  • Use with NJC Equipment Hire Mini Dumpers
  • Easy to operate with single, pilot operated joystick
  • Powerful & compact
  • Rubber tracks increase capability on uneven ground
  • Versatile and easily transportable on trailer
  • A range compatible attachments (see attachments tab)
  • Weight: 1265 kg
  • Engine: 1300cc Diesel 18.5 kW (24.8 hp)
  • Track Width: 24.1 cm
  • Wheelbase: 104.1 cm
  • Fuel Capacity: 41.64 litres
  • Ground Speed: 7.6 km/h
  • Dimensions: L 2560mm x W 1029mm (1250mm Bucket) x H 1381mm
  • Maximum Operating Height: 267.2 cm
  • Hinge Pin Height: 206 cm
  • Dump Height: 154.9 cm
  • Dump Angle: 40-degrees
  • Reach – Fully Raised: 62.5 cm
  • Tip Capacity (As per SAE J732): 1,393 kg
  • Rated Operating Capacity (35% of Tip Capacity) As per SAE J818: 487.6 kg

Mini Loader Attachments:

  • 4 in 1 Bucket:
    • Soil levelling, scraping (up to 200mm deep), bite and bucket work
  • Post Hole Borer:
    • Augers 150mm – 600mm
  • Trencher:
    • 900mm Max Depth x 150mm Width
  • Suitable eye protection
  • Hearing protection
  • Hard/safety hat is recommended
  • Protective gloves
  • Suitable footwear
  • NJC specialty trailer
  • Suitable customer supplied trailer with tilt or ramps
NJC HIre Mini Loader Tracked Skid Steer
NJC Hire Toro Mini Loader Trencher Attachment
NJC Hire Toro Mini Loader Post Hole Borer
Mini Loader SpecsMini Loader ManualCall 0800 652 555

Delivery Service Available

Petrol Drill – Planter / Timber

NJC Equipment Hire Hand-held Petrol Drill that can be used for many different farming, DIY and commercial applications. Perfect when no power is available, the powerful petrol engine is suitable for drilling wood or loosening soil for shallow planting.

  • Farming and Agriculture
  • Where no power is available
  • Drilling through thick timber with auger drill bits
  • Shallow planting with planter auger
  • Standard quick-release chuck with a chuck width of 13 mm.
  • Two forward gears, reverse gear and neutral position.
  • Auger: Planter
  • Augers Timber: 13mm – 25mm
  • Standard quick-release chuck with a chuck width of 13 mm.
  • Two forward gears, reverse gear and neutral position.
  • Displacement: 2cc
  • Power: 8kW
  • Weight: 8kg
  • Timber Augers: 13mm – 25mm
  • Planter Auger:
    • Shallow loosening of soil
  • Suitable eye protection
  • Hearing protection
  • Protective gloves
  • Suitable footwear
  • Will fit in the boot of your car
Stihl Petrol Drill ManualCall 0800 652 555

Delivery Service Available

Post Hole Borer – 1 Man

NJC Equipment Hire One Man Post Hole Borers are a light, hand held, 2 stroke petrol powered tool, ideal for boring up to 300mm diameter holes for fence posts, planting shrubs or soil testing. The Quickstop drill brake release lever stops the drill immediately when it gets stuck in the ground, your wrists will thank you for it!

Get in touch with our team to choose the right sized auger for your next landscaping job today.

  • Garden
  • Construction
  • Post holes
  • Planting
  • Fencing
  • Soil testing
  • Augers: 90mm – 300mm
  • A light and easy to use
  • Powerful 2 stroke motor
  • Ideal for boring up to 300mm diameter holes
  • Quickstop drill brake release lever stops the drill immediately when it gets stuck in the ground, It also serves as a reverse rotation lock so a stuck bit can then be easily unscrewed manually
  • Power: 1.4kW
  • Displacement: 36.3cc
  • Weight: 10kg
  • Augers: 90mm – 300mm
  • Suitable eye protection
  • Hard/safety hat is recommended
  • Protective gloves
  • Safety Chaps
  • Suitable footwear
  • Will fit in the boot of your car
1 Man Post Hole Specs1 Man Post Hole ManualCall 0800 652 555

Delivery Service Available

ROTARY HOE – 16HP HYDRAULIC – HEAVY

The NJC Equipment Hire Heavy-Duty Hydraulic Rotary Hoe is perfect for tackling any garden or landscaping project with ease. Powered by a strong 16HP V twin engine with hydraulic drive makes turning over earth and soil, particularly on large heavier plots a whole lot easier. Take the time and effort out of breaking ground and hire our Hydraulic Rotary Hoe today!

Get in touch with one of our experienced team to book.

  • Farming and Agriculture
  • Gardens
  • Lawns
  • Lifestyle blocks
  • Tough to break soil
  • Wide hoe cutting width of 508mm
  • Impressive 175mm Hoeing depth
  • Engine protection bar
  • Safety clutch stops tines and wheels immediately
  • Remote air filtration system
  • Rotor moulder fuel tank
  • Adjustable handle bars to avoid walking on loose soil
  • Engine:  16.0hp (12kw) V Twin Ohv Petrol
  • Fuel Capacity: 9L
    Start: Manual Start
  • Length: 1981mm (78″)
  • Width: 686mm (27″)
  • Height: 1118mm (44″)
  • Weight: 300kg (661lbs)
  • Maximum Hoeing Width: 508mm (20″)
  • Maximum Hoeing Depth: 175mm (7″)
  • Wheel Width: 584mm (23″)
  • Infinate Forward Speed: 24 Metres Per Minute
  • Infinate Reverse Speed: 24 Metres Per Minute
  • Max Tine Speed: 260rpm
  • Suitable eye protection
  • Hearing protection
  • Protective gloves
  • Suitable footwear
  • NJC Tilt Trailer or similar
RH1620_Hydraulic_Rotary_Hoe
RH1620_Hydraulic_Rotary_Hoe Blades
Rotary Hoe ManualCall 0800 652 555

Delivery Service Available

SCRUB CUTTER TRI BLADE – PETROL

The NJC Equipment Hire Scrub Cutter is a powerful tri-blade cutter for cutting overgrown grass, weeds and vegetation. A step up from our nylon weed eaters, perfect for lifestyle blockers, farmers and professionals. Harness included with hire.

  • Farming agriculture
  • Clearing long grass and weeds
  • Upgrade to standard a weed-eater
  • Farming, Lifestyle blocks
  • Professional / Trade use
  • Where no power is available
  • Powerful 2-stroke motor
  • Efficient with low fuel consumption
  • Easy use
  • Steel Tri-blade blade for ease of cutting
  • Harness (included)
  • Displacement:  51.6cc
  • Power output:  2.4kW /3.3bhp
  • Weight:  10.2kg
  • Cutting blade:  Tri blade
  • Fuel capacity:  0.9L
  • Overall length: 1760mm
  • Noise level:  100dB
  • Suitable eye / face protection
  • Hearing protection
  • Protective gloves
  • Suitable footwear
  • Station wagon size or larger preferred
NJC Hire STIHL Scrubcutter FS560C
NJC Hire Scrub Cutter Harness
Scrub Cutter ManualCall 0800 652 555

Delivery Service Available

STUMP GRINDER – PETROL

NJC Equipment Hire Stump Grinders are compact and manoeuvrable, especially handy for hard to reach stumps and tight access sites. Grinds of 350mm above ground and 280mm below ground remove unsightly stumps and roots efficiently turning them to mulch. A well balanced design with easy to use controls ensure easy operation – for both professionals or homeowners.

  • Small to medium tree stumps and roots
  • Exposed roots
  • Tight access
  • Hard to reach places
  • Cuts up to 350mm above ground and 280mm below
  • Compact & Manoeuvrable
  • Great for tight, hard to access areas or close to other live trees
  • Grinder teeth rather than shredding action for smoother, faster stump grinding
  • Heavy duty centrifugal clutch
  • Handles with reduced vibration technology
  • Lifting handles for easy loading
  • Foldable handles for transporting
  • Operating Weight: 109kg
  • Cutter Depth: 280mm below grade
  • Cutter Height: 350mm above grade
  • Dimensions: 1930mm L x 750mm W x 1100mm H
  • Engine Power: 13hp / Honda GX390
  • Fuel: 4-stroke petrol
  • Clutch: Centrifugal clutch
  • Driveline: Double V belt drive
  • Suitable eye / face protection
  • Hearing protection
  • Protective gloves
  • Suitable footwear
  • Truck, ute or van required
  • Can be towed on an NJC trailer
NJC Toro SGR13 Stump Grinder
NJC Hire Toro SGR-13 Stump Grinder Side
Stump Grinder BrochureStump Grinder SGR13 ManualCall 0800 652 555

Delivery Service Available

Sweeper – Walk Behind

Keeping large areas tidy with a broom is hard work.The STIHL KG 770 Sweeper enables efficient low-dust sweeping of large areas of up to 1500m2 both indoors and outdoors and on wet or dry surfaces.

  • Suitable for;
    • Small yards
    • Paths
    • Workshops
    • Warehousing
  • Mechanical traction
  • Excellent manoeuvrability
  • For areas up to: 500 m²
  • Weight: 13 kg
  • Sweeping width: 77 cm
  • Sweeping capacity: 900 m²/h
  • Waste container cap: 50 L
  • Suitable footwear
  • Protective mask
  • Station wagon, ute or trailer required
Stihl Sweeper ManualCall 0800 652 555

Delivery Service Available

TRACTOR – 38HP WITH ATTACHMENTS

Our NJC HIre 38HP 4WD Tractor with front end loader and Hydrostatic Transmission is a versatile workhorse for all your agriculture, lifestyle and farming needs. We have a Slasher/topping attachment available via the PTO linkage as an optional add on. Contact our experienced hire team to book.

  • Farming & Agriculture
  • Moving soil
  • Slasher/ topping attachment
  • Ag tyres for greater grip
  • Tight turning circle for efficient manoeuvrability
  • Smooth 3 speed HST transmission
  • Optional front end loader attachment with 400kg loading
  • Optional Slasher/topper attachment
  • Power Steering
  • Wet disc brakes for responsive smooth breaking
  • 38L diesel fuel tank for longer operation
  • Live continuous running PTO for attachments
  • Comfortable suspension seat
  • Foldable ROPS for safety
  • Model: Kubota L3800 with front end loader
  • Engine: 37.4hp / 27.9kW
  • Fuel: Diesel
  • Cylinders: 3
  • Fuel Tank Capacity: 38L
  • Transmission: HST (Hydrostatic) 3 speed range
  • Drive: 4WD
  • Brakes: Wet disc type
  • Steering: Integral type power steering
  • PTO Power: 30hp / 22.4kW Live continuous running
  • Tyre size: Front 7-16 / Rear 11.2-24
  • Travelling Speed: Forward 0- 22.7kph / Reverse 0 – 20.5kph
  • Weight: (w RPOS excluding bucket and slasher): 1210kg
  • Max Bucket Load: 400kg
  • Dimensions:
    • Min Ground Clearance: 340mm
    • Wheelbase: 1610mm
    • Tractor only: 2700mm L x 1400mm W x 2330mm H (w ROPS)
    • Tractor with Front Loader Bucket: 3800mm L x 1695mm W (Bucket) x 2330mm H (w ROPS)
    • Tractor With Front Loader & Slasher : 6300mm L x 1695mm W x 2330mm H (w ROPS)

Front End Loader Bucket

  • Bucket included in hire price with or without bucket attached.
    • NJC can remove this from tractor if required.
  • Max load weight: 400kg
  • Width: 1695mm

Land Pride RCR1860 Rotary Cutter/Slasher

  • Available as an added extra hire item
    • Please inform staff if you require this due to transport requirements
  • Width: 1650mm
  • Dual blade cutting
  • 10 Gauge Stump Jumper – Standard round stump jumper slides over stumps, rocks, and debris.
  • The RCR1860 Rotary Cutter/slasher is ideal for light-duty maintenance around the farm, on gentle slopes, or slightly contoured right-of-ways. A fully welded deck adds additional strength while the floating 3-point permits the deck to hug the terrain for a quality cut. The cutters have a category I three-point hitch and are Quick Hitch adaptable. This has a standard ASAE Category 3 driveline with slip-clutch protection and solid rubber tailwheel.
  • Suitable eye protection is required
  • Hearing protection is required
  • Hard/safety hat is recommended
  • Protective footwear and gloves are recommended

Tractor with or without front bucket:

  • Can be transported via one of our car trailers (without slasher attachment)

Tractor with Slasher attachment:

  • NJC Transporter or similar vehicle required due to 6.3m overall length
NJC Hire Kubota L3800 Tractor CC
NJC 38HP Tractor Bucket Slasher
RCR1860 Slasher action
38HP Tractor Brochure38HP Tractor ManualRCR1860 Slasher SpecsRCR1860 Slasher ManualCall 0800 652 555

Delivery Service Available