NJC Equipment Hire Auckland has a series of Access elevated work platforms including Slab Scissor Lifts, Rough terrain Scissor Lifts, Cherry Pickers and Booms for rent or hire. Get in touch with our experts to talk through your Access requirements and remember, if you can’t find what your looking for here, let us know and we can normally find a solution for you.
6M SLAB SCISSOR LIFT – ELECTRIC
(8M working height)
At NJC Equipment Hire Auckland we have a range of battery powered 6m Slab Scissor Lifts (8m working height approx.) to be used on level surfaces. Perfect for Trade & DIY use including painting, cleaning, electrical, plumbing, sign writing and general overhead or elevated use. Supplied with our specialist scissor lift trailer.
- Scissor lift will only operate on flat, hard level surfaces.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- Plastering
- Painting
- Elevated plumbing work
- Cleaning
- Building & Construction
- Overhead lighting & electrical installation
- Warehousing
- Film and TV industry
- Sign installation
- General overhead work
- Narrow width of 815mm allows access through standard doorway
- 5.8m platform / 7.8m working height
- Battery powered with built in 240V battery recharger
- Non marking tyres
- Can be driven whilst work platform is still elevated
- 915mm extending deck for extra reach
- Automatic pot-hole safety protection
- Proportional speed and lift controls
- This item can be supplied on a trailer or delivered directly to your work site
- Platform Height: 5.8m
- Working Height: 7.8m
- Power: Battery electric with built-in 240V charger
- Overall Width: 815mm
- Overall Length: 1745mm
- Deck Extension: 915mm
- Stowed Height: Varied (JLG R1932 & ES1932 / Skyjack SJIII3219)
- Deck Load Capacity: 227kg
- Extension Deck Load Capacity: 120kg
- Gross Weight: 1550kg
- Gradeabilty: 2% Operating / 25% Driving
- Hard/safety hat is recommended
- Suitable footwear
- Harness advised but not compulsory
- DELIVERY AVAILABLE
- NJC scissorlift trailer or equivalent customer supplied trailer is required
- A suitable towing vehicle
- Refer to your vehicle manufacturer tow rating
- Towing Capacity
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
8M SLAB SCISSOR LIFT – ELECTRIC
(10M working height)
At NJC Equipment Hire Auckland we have a range of battery powered 8M Slab Scissor Lifts (10m working height) to be used on level surfaces. Perfect for Trade & DIY use including painting, cleaning, electrical, plumbing, sign writing and general overhead or elevated use.
- Scissor lift will only operate on flat, hard level surfaces.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- Plastering
- Painting
- Elevated plumbing work
- Cleaning
- Building & Construction
- Overhead lighting & electrical installation
- Warehousing
- Film and TV industry
- Sign installation
- General overhead work
- Extra Capacity basket: 454kg (Main Platform 318kg / Extension: 136kg)
- Raised Heights: 7.82m platform / 9.65m working height
- Lowered Height: 1.17m platform
- Battery powered with built in 240V battery recharger
- Non marking tyres
- Can be driven whilst work platform is still elevated
- 1.22m extending deck for extra reach
- Automatic pot-hole safety protection
- Proportional speed and lift controls
- Platform Height: 7.82m
- Working Height: 9.65m
- Power: Battery electric with built-in 240V charger
- Overall Width: 1190mm
- Overall Length: 2320mm
- Deck Extension: 1220mm
- Stowed Height: 2290mm (rails up)
- Stowed Height: 1900mm (rails down)
- Deck Load Capacity: 454kg
- Extension Deck Load Capacity: 136kg
- Gross Weight: 2511kg
- Gradeabilty: 25% Driving
- Hard/safety hat is recommended
- Suitable footwear
- Harness advised but not compulsory
- DELIVERY AVAILABLE
- This machine requires transporting via NJC Hire Transporters or 3rd party providers
10M ROUGH TERRAIN SCISSOR LIFT – DIESEL
(12M working height)
At NJC Equipment Hire Auckland our SJ6832RT Rough Terrain 4×4 Diesel Scissor Lifts feature a 9.75m platform height and a working height of approx. 11.75m. Ideal for use in outdoor environments and is commonly used in construction, installation and maintenance tasks across a variety of industries. This rough terrain scissor lift offers up to 40% gradeability, can tackle challenging terrain with an advanced four-wheel drive system and has self levelling outriggers.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- Generally outdoor work
- Suitable on uneven ground
- Plastering
- Painting
- Elevated plumbing work
- Cleaning
- Building & Construction
- Overhead lighting & electrical installation
- Warehousing
- Film and TV industry
- Sign installation
- General elevated / overhead work
- Great for outdoor uneven surfaces
- Self levelling outriggers
- 4WD System
- Easy to use controls
- 9.75m Platform height
- 11.75m Working height
- Up to 40% gradeability
- Large platform size 1.42 x 2.44m, extendeable to 3.5m
- Distributed platform load up to 318kg & 136kg extension
- Non marking wheels for hard floors
- Raised Platform Height: 9.75m
- Working Height: 11.75m
- Lowered Platform Height: 1.37m
- Platform Size: 1.42m W x 2.44m L (Extendeable to 3.5m)
- Distributed Platform Load Capacity: 318kg
- Extension Deck Load Capacity: 136kg
- Dimensions: 1.78m W x 2.72m L x 2.51m H
- Weight: 3,443kg
- Ground Clearance: 200mm
- Gradeability: 40%
- Self Levelling Outriggers: Yes
- Drive: 4WD
- Drive Speed (Stowed): 6.1kph
- Drive Speed (Raised): 0.6kph
- Engine: Diesel 24.8 hp
- Fuel Tank Capacity: 87L
- Hard/safety hat is recommended
- Suitable footwear
- Harnesses available but not compulsory / site specific
- DELIVERY AVAILABLE
- This machine requires transporting via NJC Hire Transporters or 3rd party providers
12M CHERRY PICKER – TOWABLE – ELECTRIC
Our NJC Hire towable 12M Cherry Picker (Z Boom Lift) is easy to use and a quiet environmentally friendly operation being electric battery powered. Self-levelling outriggers combined with outstanding reach capabilities and simple controls make this hydraulic boom lift perfect for painting, sign writing, tree maintenance, cleaning applications, lighting, plumbing and general overhead work. Easy to transport, this is a great option for Trade & Home DIY applications.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- Painting
- Signwriting
- Tree maintenance
- Lighting
- Plumbing
- Cleaning and building maintenance
- Factories and Warehouses
- General overhead work
- Automatic levelling system for fast set up
- Stable outriggers
- Towable trailer mounted unit.
- Battery powered with 240V charging
- Quiet and environmentally friendly operation
- Simple to use controls
- Can be operated from ground or basket
- Excellent reach
- Portable
- Working height: 12.36m
- Platform height: 10.36m
- Safe working load : 200kg
- Horizonal reach: 5.59m
- Clear out reach: 4.09m
- Up & over clearance: 4.90m
- Platform width: 680mm
- Platform length: 1.12m
- Total unit stowed width: 1.45m
- Total unit stowed length: 5.5m
- Total unit stowed height: 1.94m
- Ground clearance: 0.24m
- Outrigger footprint length: 3.26m
- Outrigger footprint Width: 3.59m
- Outrigger levelling ability: 11 Degrees
- Weight: 1450kg
- Trailer braked: Yes
- Power: 24V DC ( 4 x 6V 225Ah Batteries)
- Charging: 240V
- Hydraulic tank capacity: 14.57L
- Hydraulic system capacity: 17L
- Safety harness is compulsory
- Hard/safety hat is recommended
- Suitable footwear
- Eye protection advised
- DELIVERY AVAILABLE
- A suitable towing vehicle
- Refer to your vehicle manufacturer tow rating
- Towing Capacity
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
12M CHERRY PICKER – TOWABLE – HYBRID
NJC Hire Nifty 120T Towable 12M Cherry Picker (Z Boom Lift) is easy to use and versatile with hybrid electric/petrol power. Hydraulic outriggers combined with outstanding reach capabilities and simple controls make this hydraulic boom lift perfect for painting, sign writing, tree maintenance, cleaning applications, lighting, plumbing and general overhead work. Easy to transport, this is a great option for Trade & Home DIY applications.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- Painting
- Signwriting
- Tree maintenance
- Lighting
- Plumbing
- Cleaning and building maintenance
- Factories and Warehouses
- General overhead work
- Hydraulic outriggers
- Towable trailer mounted unit.
- Battery/Petrol powered Hybrid
- Quiet and environmentally friendly operation when required
- Simple to use controls
- Can be operated from ground or basket
- Excellent reach
- Portable
- Working height: 12.2m
- Platform height: 10.2m
- Safe working load : 200kg
- Horizonal reach: 6.1m
- Clear out reach: 4.09m
- Up & over clearance: 4.90m
- Platform width: 650mm
- Platform length: 1.1m
- Total unit stowed width: 1.5m
- Total unit stowed length: 4.5m
- Total unit stowed height: 1.9m
- Ground clearance: 260mm
- Outrigger footprint Width: 3.55m
- Outrigger levelling ability: 11 Degrees
- Weight: 1400kg
- Trailer braked: Yes
- Power: 24V DC ( 4 x 6V 250 Ah Batteries) & Petrol
- Fuel: Petrol (Unleaded 91)
- Tank: 5L
- Charging: 240V
- Hydraulic tank capacity: 14.57L
- Hydraulic system capacity: 17L
- Safety harness is compulsory
- Hard/safety hat is recommended
- Suitable footwear
- Eye protection advised
- DELIVERY AVAILABLE
- A suitable towing vehicle
- Refer to your vehicle manufacturer tow rating
- Towing Capacity
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
16M KNUCKLE BOOM 4X4 (Extra Capacity) – DIESEL
At NJC Equipment Hire Auckland our 16m Articulating Booms (Knuckle Boom) feature a working height of approx.15.5-16m with a 13.72m elevated platform height. Commonly used in construction, installation and maintenance tasks across a variety of industries. SJ45AJ+ booms offer an increased capacity basket of 300kg and precise positioning capabilities. The tight turning radius on these machines, non marking tyres and minimal tail swing make them ideal for maneuvering in confined areas.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- General elevated / overhead work
- Building & Construction
- Warehousing
- Film and TV industry
- Sign installation
- Increased basket capacity (300kg)
- 15.5m working height
- Non marking tyres
- Eco upgrades – 15% weight reduction, reduction in noise and fuel consumption from previous models
- Best in class reach for size
- Up and over reach ability
- Ability to drive at full elevation
- Diesel 24.8hp
- 4WD traction
- 40% Gradeability
- Raised Platform Height: 13.72m
- Working Height: 15.54m
- Horizontal Reach: 6.93m
- Up & Over Height: 7.45m
- Platform Size: 0.76m x 1.83m
- Distributed Platform Load Capacity: 300kg (Max 2 persons)
- 355° Turret rotation, platform rotation of 170°
- Tail Swing: 0.61m
- Turning Radius (Outside): 4.34m
- Turning Radius (Inside): 1.50m
- Driveable at full height
- Weight: 5,075kg
- Dimensions (Stowed): 2.29m W x 6.0m L x 2.16m H
- Ground Clearance: 390mm
- Gradeability: up to 40%
- Axle Oscillation: 12.7cm
- Self Levelling: Yes
- Drive: 4WD
- Drive Speed (Stowed): 4.0km/h
- Wind Speed: 12.5 m/s
- Engine: Diesel 24.8hp
- Fuel Tank Capacity: 64L
- Hard/safety hat is recommended
- Suitable footwear
- Harness advised but not compulsory
- DELIVERY AVAILABLE
- NJC scissorlift trailer or equivalent customer supplied trailer is required
- A suitable towing vehicle
- Refer to your vehicle manufacturer tow rating
- Towing Capacity
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
16M KNUCKLE BOOM 4X4 – DIESEL
At NJC Equipment Hire Auckland our 16m Articulating Booms (Knuckle Boom) feature a working height of approx.16.1m with a 14.1m platform height. Commonly used in construction, installation and maintenance tasks across a variety of industries. SJ46AJ articulating booms offer precise positioning capabilities packaged in a high capacity boom with industry-leading up-and-over reach. The tight turning radius on these machines and minimal tail swing make them ideal for maneuvering in confined areas.
- Some worksites may require EWP certification to use on site
- Please read Risk Assessment document attached before operating this machine. Caution required around overhead power lines.
Talk to our team about your Access requirements today.
- General elevated / overhead work
- Building & Construction
- Warehousing
- Film and TV industry
- Sign installation
- 16.1m Working height
- Best in class reach for size
- Up and over reach ability
- Ability to drive at full elevation
- Diesel 48hp
- 4WD traction
- 45% Gradeability
- Zero tail swing
- Raised Platform Height: 14.1m
- Working Height: 16.1m
- Horizontal Reach: 7.54m
- Up & Over Height: 7.45m
- Platform Size: 0.76m x 1.83m
- Distributed Platform Load Capacity: 227kg (Max 2 persons)
- 355° Turret rotation, platform rotation of 170°
- Tail Swing: Zero
- Turning Radius (Outside): 4.52m
- Turning Radius (Inside): 2.49m
- Driveable at full height
- Weight: 6,395kg (foam filled tyres)
- Dimensions (Stowed): 2.24m W x 6.5m L x 2.07m H
- Ground Clearance: 390mm
- Gradeability: up to 45%
- Axle Oscillation: 12.7cm
- Self Levelling: Yes
- Drive: 4WD
- Drive Speed (Stowed): 7.7km/h
- Wind Speed: 12.5 m/s
- Engine: Diesel 48 hp
- Fuel Tank Capacity: 64L
- Hard/safety hat is recommended
- Suitable footwear
- Harness advised but not compulsory
- DELIVERY AVAILABLE
- NJC scissorlift trailer or equivalent customer supplied trailer is required
- A suitable towing vehicle
- Refer to your vehicle manufacturer tow rating
- Towing Capacity
- It is the driver’s legal responsibility to check vehicle and towbar manufacturer’s towing specifications and to ensure maximum loadings are adhered to.
