NJC Equipment Hire Auckland has a full range of tools to help you get the job done. Hammer Drills, Core Drills, Petrol Drills, Cordless Tools, Mag Based Drills, Impact Wrenches, Grinders, Nail Guns, Breakers, Rebars and more.
Get in touch with your local NJC team about your requirements today.
BREAKER / HAMMER DRILL – LIGHT – ELECTRIC
NJC Equipment Hire Auckland has light electric hammer drills / breakers for light breaker or drilling work.
- Removal of wall tiles.
- Removal of plaster render.
- Demo work on walls.
- Demo brickwork.
- Powerful 3-mode Rotary Hammer Drill
- Features SDS-Plus push+go chuck and 24 positions for chiselling mode
- Auto stop carbon brushes protect motor
- Variable speed promotes accuracy
- Rubberized soft grips reduce fatigue
- Torque limiter protects operator in event of jamming
- Interchangeable chuck for breaking or drilling
- Shank type: SDS plus
- Capacities – Max / Optimum:
- Concrete: 32mm / 19mm
- Steel: 13mm / 8mm
- Wood: 32mm / 19mm
- Impacts per minute: 1,630-3,300ipm
- No load speed: 315-630rpm
- Joules: 5j
- Overall dimensions: 398mm
- Net weight: 2kg
- Continuous rating input: 850W
- Power supply cord: 5.0m
- Carbon brush: 350
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
BREAKER – MEDIUM – ELECTRIC
A handheld hammer action jackhammer, which uses a point or chisel attachment to break brickwork or concrete, remove floor coverings or a range of other demolition uses. For an effective solution to removal of floor coverings over large areas see Heavy Breaker – Tile Smasher on Trolley.
- Removal of wall tiles.
- Removal of plaster render.
- Demo work on walls.
- Demo brickwork.
- Suppression of motor speed during no-load
- Reduces vibration of tool body when idling
- Decreases the amount of vibration to operator’s hands
- Minimises deflection of bit tip from aiming point when starting clipping
- AVT (Anti-Vibration Technology)
- Variable speed control by dial
- LED power light that indicates trouble with the electric circuit
- Shank Type: 30mm Hex
- Blows per minute: 730-1,450ipm
- Joules: 8j
- Overall dimensions: 715mm
- Net weight: 17kg
- Continuous rating input: 1,510W
- Power supply cord: 5m
- Carbon brush: 175
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
BREAKER TILE SMASHER – MEDIUM – ELECTRIC
The fastest, safest way to remove tiles and thinset! The Jackhammer trolley lets you remove ceramic tiles, thinset, cork and vinyl tiles up to six times faster than any other method. Nothing beats it for speed and efficiency. To be used with our Makita Breakers.
- Perfect for large areas
- Easily removing tiles from concrete surfaces
- Thinset , vinyl, cork, ceramic tiles etc
- No bending over holding jackhammer for hours
- Five stops provide the perfect angle of attack
- Foot rest helps you apply forward pressure
- Rubber mounts and bushes absorb vibrations
- Work faster for longer with less fatigue
- One tool removes tile, thinset, vinyl, cork
- Shank Type: 28.6mm
- Hex blows per minute: 870ipm
- Joules: 8j
- Overall dimensions: 843mm
- Net weight: 32.2kg
- Continuous rating input: 2,000W
- Power supply cord: 5.0m
- Carbon brush: 204
- Weight (trolley without jackhammer) 5kg
- Dimensions (trolley without jackhammer) L 1110mm x H 540mm x W 570mm
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
BREAKER – LARGE – ELECTRIC
A large upright 240v powered jackhammer, using point, chisel, bitumen cutter and clay spade attachments, to complete a range of medium to heavy size demolition applications.
- Medium- to heavy-duty demolition of concrete slabs and foundations
- Breaking up asphalt for road building, repair work and pipe laying
- Removing concrete for rebar connections and utility connections
- Digging and tamping in earthwork
- Removal of clay and rock for foundation work
- Highest-in-class demolition power with AVT (Anti-Vibration Technology)
- Counter weight mechanism and vibration absorbing housing helps to reduce vibration
- Suppression of motor speed during no-load reduces vibration of tool body when idling
- Soft start for suppressing start-up reaction
- Soft grip provides more control and less hand fatigue
- Newly developed dust extraction attachment is available
- 28.6mm Hex shank
- Shank Type: 28.6mm
- Hex blows per minute: 870ipm
- Joules: 8j
- Overall dimensions: 843mm
- Net weight: 32.2kg
- Continuous rating input: 2,000W
- Power supply cord: 5.0m
- Carbon brush: 204
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
Core Drill – Electric
Our core drill is used with diamond core bits for drilling holes up to 150mm* in diameter through concrete, masonry and stone. The powerful core drill motor combines high performance with electronic guidance with a host of safety and efficiency features, including a soft start, overload clutch and double insulated wiring.
- Wall and floor penetrations
- Wet and dry core drilling
- Core drilling;
- concrete
- masonry
- stone
- Core drill bits 40mm – 150mm
- Electronic positioning system
- 3 speed gearbox
- 360° front handle
- Soft Start
- Overload clutch
- Hose adaptor for dust suppression and cooling of the core bit
- Double insulated wiring
- Weight: 5kg
- Dimensions: 560mm L x 105mm W
- Power source: 240V
- Spindle Speed: 580 / 1400 / 2900 rpm
- Rated input: 85 kW
- Noise: 107dB
- Max handheld drill bit: 100mm
- Max stand-Held drill bit: 150mm*
- Overload clutch: Yes
- Water adapter: G ¼”
- Water pressure max: 8 Bar
- Double insulated wiring: Yes
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
CORE DRILL STAND & VACUUM PUMP
NJC Equipment Hire Core Drill Stand with ‘optional’ Vacuum Pump to fit our DM220 Core Drills for drilling up to 150mm. Increase stability and accuracy with this lightweight stand and reduce set up time, money and mess with the impressive vacuum pump which often negates the need for anchor bolts.
- Stable & accurate drilling
- Secure fixing to surfaces
- Optional Vacuum Stand minimising set up time
- Wall and floor penetrations
- Wet and dry core drilling
- Core drilling;
- concrete
- masonry
- stone
- Suits DM220 Core Drill – Core drill bits 40mm – 150mm
- User-friendly base plate
- Quick mounting of drill motor
- Easy transportation
- Channels, pipes and cables
- Angle / Horizontal / Stitch drilling
- Straight & Accurate Drilling:
- The carriage has guide rollers which helps drill straight holes.
- Optimum Cranking Speed:
- Carriage with single and double gearing for efficient drilling.
- Angle Drilling:
- The unit can be set for drilling at different angles.
- Vertical Drilling:
- Drilling upwards and downwards.
- Travel Length: 685mm max
- Column’s Angling: 0-60º
- Travel Length: 685mm max.
- Dimensions: L 409mm x W 266mm x H 1045mm
- Weight: 16kg
- Fixed anchors or Vacuum Pump Attachment
- Optimum cranking speed depth control
- A must when wet diamond drilling repeat holes in concrete and similar flat, horizontal, non-porous surfaces.
- Using a vacuum pump on such surfaces often negates the need to anchor bolt a drill column in place before drilling, saving considerable amounts of time, money and mess.
- Fast efficient fixing
- Reduce time on set up
- Powerful electric motor and tubular-shaped tank,
- Air flow of 200ltr/min under vacuum at 0.9bar.
- Power Output: <0.55kW
- Vacuum Tank Volume: 5 litres
- Air Flow: < 200 l/min
- Max. Vacuum: 0.9 Bar
- Dimensions: 540 x 300 x 900mm
- Weight: 19kg
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
- Will fit in the boot of your car
Magnetic Based Drill – Cordless
Independent magnetic base means this drill can drill 40x 20mm holes in 6mm steel plate on one charge, coupled with a spare battery and a fast charge charger this is the ideal workhorse. Able to run a 38mm annular cutter or a 13mm twist drill bit this is a versatile, cordless option for heavy steel drill work. Equipped with auto-stop lift off detection for added safety and an onboard cutting oil canister for all applications.
- Great for drilling at heights
- Drilling tough steel
- Useful for absence of power
- POWERSTATE™ brushless motor delivers maximum power and longer motor life.
- REDLINK PLUS™ intellegence provides optimised performance and overload protection.
- REDLITHIUM™ battery technology provides more work per charge.
- Self powered magnet base delivers up to 900 kg of holding force.- means it wont fall off when battery runs out!
- 3/4″ Weldon to 1/2″ Chuck Adaptor.
- 38 mm Annular cutter capacity and 13mm twist bit capacity.
- 2 Speed gearbox (400 / 600 rpm).
- Equipped with Auto-Stop lift off detection.
- On board cutting oil canister for customised applications.
- Built in LED light to illuminate the work surface.
- Voltage: 18V
- Speed: 400 / 600 rpm
- Holding Force: 900 kg
- Max Annular Cutting: 38 mm
- Max Twist Bit: 13 mm
- Minimum plate thickness: 6 mm
- Feed length: (Drill) 130 mm, (Tool) 146 mm
- Width: 355 mm
- Height: 395 mm
- Weight: 38 kg
- LED light: Yes
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
Petrol Drill – Planter / Timber
Hand-held petrol drill that can be used for many different farming and commercial applications. Perfect when no power is available, the powerful petrol engine is suitable for drilling wood or loosening soil for shallow planting.
- Farming and Agriculture
- Where no power is available
- Drilling through thick timber with auger drill bits
- Shallow planting with planter auger
- Standard quick-release chuck with a chuck width of 13 mm.
- Two forward gears, reverse gear and neutral position.
- Auger: Planter
- Augers Timber: 13mm – 25mm
- Standard quick-release chuck with a chuck width of 13 mm.
- Two forward gears, reverse gear and neutral position.
- Displacement: 2cc
- Power: 8kW
- Weight: 8kg
- Timber Augers: 13mm – 25mm
- Planter Auger:
- Shallow loosening of soil
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
CONCRETE GRINDER 5” (125MM) – ELECTRIC
Our 5″ concrete grinder is perfect for levelling uneven surfaces, removing and cleaning concrete, plaster, adhesives, paint and other compounds.
- Levelling uneven surfaces,
- Removing and cleaning concrete, plaster, adhesives, paint and other compounds.
- Great for small areas and getting into corners, edges and tight spaces.
- Grinding disk supplied
- Super Joint System II developed for effective vibration absorption
- Electronic current limiter
- Speed control and soft start
- Anti-restart function
- Ergonomically best possible barrel grip
- Variable speed settings
- Depressed centre wheel: 125mm
- Cut-off disc: 125mm
- Wire cup brush: 75mm (N/A)
- Diamond wheel: 125mm
- Spindle thread: M14 x 2
- No load speed: 2,800-11,000rpm
- Overall dimensions: 303mm
- Net weight: 2.5kg
- Continuous rating input: 1,400W
- Power supply cord: 2.5m
- Carbon brush: 318
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
CONCRETE GRINDER 7” (180MM) – ELECTRIC
Our 7″ concrete grinder is perfect for levelling uneven surfaces, removing and cleaning concrete, plaster, adhesives, paint and other compounds.
- Levelling uneven surfaces,
- Removing and cleaning concrete, plaster, adhesives, paint and other compounds.
- Great for small areas and getting into corners, edges and tight spaces.
- Low vibration rear handle & rubberised soft-grip enhances operator comfort and control
- Superior anti-dust, and labyrinthal bearing-protective construction
- Quality machined bevel gears
- Increased varnish to windings for improved heat resistance
- Soft start with current limiter
- Vibration absorbing side grip
- Rotatable rear handle for increased safety when cutting materials
- Depressed centre wheel: 180mm
- Cut-off disc: 180mm
- Wire cup brush: 110mm (N/A)
- Diamond wheel: 180mm
- Spindle thread: M14 x 2
- No load speed: 8,500rpm
- Overall dimensions: 473mm
- Net weight: 6.4kg
- Continuous rating input: 2,300W
- Power supply cord: 2.5m
- Carbon brush: 204
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
Impact Wrench – 13mm Cordless
Cordless hand tool designed to loosen and tighten nuts and bolts, drive anchors etc. The powerful battery powered motor provides 200Nm of torque for demanding applications.
- Construction
- Automotive
- DIY
- Bolts
- Screws
- Makita Brushless motor ensures longevity of working life
- Lithium ion technology for long lasting battery
- 3 Stage electronic impact power selection
- Twin led lights with afterglow function
- Battery protection circuit
- Ribbed soft grip for ease of operation
- Electric brake for total control
- Capacities;
- Square drive 12.7mm (1/2″)
- Standard bolt: M12-M30
- High tensile bolt: M10-M24
- Max fastening torque: 1,050Nm
- Impacts per minute;
- Hi: 0-2,200
- Med: 0-2,000
- Low: 0-1,800
- No Load Speed;
- Hi: 0-1,800
- Med: 0-1,000
- Low: 0-900
- Overall dimensions: 229mm
- Net weight: 3.7kg
- Voltage: 18V
- Suitable eye protection
- Hearing protection
Palm Nailer – Cordless
A compact, portable solution for powerful nail driving in hard-to-reach workspaces. M12 Cordless Palm Nailer provides a portable solution for professional nailing applications in places unreachable by a traditional nail gun.
Hard to reach places not suitable for traditional nail guns.
- Powerful 2.9 J impact energy drives a 50mm nail in under 2 seconds
- Industrial magnetic collet securely holds framing nails for one handed use
- Gets into spots unreachable by a tradition nail gun
- Run time allows for 100 x 50mm nails per charge, drives in up to 200 bracket nails per charge
- Voltage: 12V
- Percussion: 9J / 270bpm
- Max nail length: 90mm
- Max nail head: 10mm
- Weight: 2kg
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
Rebar Bender / Cutters
Unique two-in-one combination of cutting and bending rebar. Jaws are made of drop forged high alloy steel with special heat treatment. Complete with 95mm former for bending 12mm and 16mm reinforcing bars satisfying the minimum requirements of NZS3101.
- With its hardened alloy steel blades, this rebar tool is designed specifically for bending and cutting reinforcing rods used in the concrete industry.
- Suitable for D12 – D16 steel
- Suitable eye protection
- Protective gloves
- Suitable footwear
Screwdriver – Self Feed Cordless
Drywall / Gib screwdriver with auto-feed to automatically feed screws to the screw gun. This unit saves valuable time and features tool-less screw depth adjustment for easy depth setting.
- Rapid fixing of panelling, plasterboard, fibro sheet and blue board to timber and pressed steel frames
- Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
- Increased rotational speed ensuring smooth screw driving
- Tool-less stopper base adjustment
- New silent clutch features high durability with direct drive transmission in reverse rotation
- Reversing switch
- Capacities: 35mm hex
- Screw strip: 25 – 41mm
- No load speed: 4,000rpm
- Overall dimensions: 424mm
- Net weight: 2.0kg
- Voltage: 18V
- Carbon brush: 440
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
