At NJC Equipment Hire Auckland, we have a large range of Cleaning & Floor Care equipment to tackle most jobs. Prepare carpet, hard flooring or outdoor areas with our range of water blasters, carpet cleaners, sanders, vacuums, floor grinders & floor strippers. Get in touch with our experts and talk about your requirements today.
Carpet Cleaner
NJC Equipment Hire Carpet Cleaners are perfect for removing soil, dirt and stains from carpet and upholstery. A multi use cleaning unit is great for small to medium areas and spot cleaning to eliminate soil, dirt and staining. Our Carpet cleaner is also designed to soak up excess water in waterlogged carpet, flooring and furniture.
- Small to medium areas
- Carpets
- Textile flooring
- Upholstery
- Car interior
- Spot cleaning
- Drying waterlogged carpets
- Flooding and excess water
- Easy to use
- Powerful cleaning
- Carpet, textile flooring and upholstery
- Large 10L cleaning solution holding tank
- Large 9L dirty water tank
- Deep cleaning with shampoo cleaning solution
- Fast drying with powerful vacuum suction
- Light and mobile
- Professional and DIY use
- Spray hose with integrated water feed, 2.5 m
- Integral accessory holder for manual nozzle
- Upholstery nozzle
- Additional handle
- Cable hook
- Narrow floor nozzle with flexible suction lip
- Handle with trigger
- Area Performance: 20-25 m²/h
- Air Flow Rate: 54 l/s
- Vacuum: 220/22 mbar/kPa
- Spray Rate: 1 l/min
- Spray Pressure: 1bar
- Voltage: 240v
- Dirty Water Tank Capacity: 9l
- Fresh Water Tank Capacity: 10l
- Turbine Power: 1250w
- Pump Power: 40w
- Weight:10.7kg
- Dimensions: 705mm L x 320mm W x 435mm H
- Hearing protection advised
- Eye protection advised
- Will fit in the boot of a car
Carpet Fan Blower
NJC Equipment Hire Carpet Fan Blowers are a multipurpose air mover/dryer. This powerful unit is heavy duty and designed to quickly and effectively dry your floors. Large volumes of air are introduced under wet carpets to rapidly dry them preventing mildew setting in. Used in conjunction with our dehumidifiers, moisture content in the room quickly dissipates reducing drying time extensively. Also used to dry out floors, walls, ceilings or where ever you need to quick drying or effective air movement.
- Construction
- Water logged construction materials such as timber framing, linings and insulation
- Renovations
- Water damage
- Drying carpets
- Drying paint
- Walls
- Ceilings
- Drying carpets, walls, bottom plates, doors
- Use in conjunction with NJC Dehumidifiers to greatly speed up drying.
- Lightweight
- Powerful airflow
- Carpet Clamp
- Stack-able up to 3 units
- 3-Speed
- 4 Position Usage (0°, 20°, 45°, 90°)
- Thermal overload protection
- For fast efficient drying, use in conjunction with NJC Dehumidifiers
- Unit Weight: 11.2 kg
- Unit Size: 41 x 45 x 47 cm (L x W x H)
- Rated Airflow: 3200 CFM
- Motor: 1 HP | 700 Watt | 3.0 Amp
- Carpet Clamp
- Stack-able up to 3 units
- 3-Speed
- 4 Position Usage (0°, 20°, 45°, 90°)
- Kickstand
- Carry Handle
- Thermal overload protection
- Tough ABS housing
- Suitable protective mask if mould present
- RCD advised
- Will fit in the boot of a car
Dehumidifier
NJC Equipment Hire Dehumidifiers are a fast and efficient way to dry out and remove damp air within a room or space to maintain desired humidity levels to stop mould forming. When used in combination with NJC Hire Carpet Fan Blowers you can greatly speed up the process of drying carpets, walls and furnishings from flooding as well as drying out construction materials such as timber framing, bottom plates and insulation during construction. Talk to our team today about how we can sort your project with our range of dehumidifiers, fans, heaters and wet / dry vacuums.
- Water logged construction materials such as timber framing, linings and insulation
- DIY excess water and flooding
- Removing moisture in air causing mould
- Maintaining required humidity levels
- Drying carpets, walls, bottom plates, doors
- Water damage
- Use in conjunction with NJC Carpet Fan Blowers to greatly speed up drying.
- Stackable
- Compact yet powerful
- Removes up to 63 ltrs per day
- Automatic humidistat is set and maintains desired humidity level
- Features an automatic pump with extension drain hose
- Quiet operation and low power consumption
- Control panel displays inlet and outlet temp and RH in real time
- Best low-humidity performance in its class
- Precision control technology – auto adjusts to maximise removal rate
- Use with NJC Hire Carpet Fan Blowers for greater efficiency
- Dimensions: L 456mm x W 318mm x H 457mm
- Weight: 30kg
- Amps: 3.4amps at 26.7’C/60% RH
- Water removal: 39L per day
- Secure, compact stacking
- Easiest to transport multiple units on a handtruck
- Performs as a “large” dehu yet fits where others don’t – lofts, bathrooms, kitchens, etc.
- Fastest access for cleaning and maintenance
- Control panel displays inlet and outlet temp and RH in real time.
- Best low-humidity performance in its class.
- Precision control technology – auto adjusts to maximise removal rate.
- Suitable protective mask if mould present
- RCD advised
- Will fit in the boot of a car
- Station wagon or larger for multiple units
FLOOR GRINDER (250MM) – ELECTRIC
NJC Equipment Hire 250mm Concrete Floor Grinders are versatile, single phase high speed concrete grinders capable of delivering productivity and performance reliability grinding up to 25-40m2/hr. Quick settings on the axle swivel allow you to swap from normal grinding to edging in seconds with no tools and coupled with the edger shroud can grind as close as 2mm from the edges.
*Used in conjunction with our H-Class S13 Dust Collector Vacuum for a dustless grinding solution.
*250mm Floor Grinder can be hired with a range of diamond grinding discs. Please talk to our experienced team for the best disc for your job.
- Concrete grinding
- Edging
- Paint removal
- Glue removal
- Membrane removal
- Adhesives
- Excellent for small areas on both commercial and domestic projects, for glue removal and levelling high spots and general concrete preparation.
- Auto axle height which means the user never has to adjust or set the axle height again.
- Quick settings on the axle swivel allowing you to swap from normal grinding to edging in seconds with no tools.
- Compact and exceptionally easy to use with very little gouging thanks to the specially designed spider coupling that is the heart of the machine allowing the diamond tooling to follow typical undulations in floors and still flatten the surface without gouging.
- The grinding disc changeover is very simple using the on-board spanner and one nut. Changeover discs in less than a minute.
- The grinder comes with a full shroud for general grinding and an edger shroud allowing the machine to grind as close as 2mm from the edges.
- 50% thicker stainless shroud for even greater durability.
- The HVA display showing voltage and amps and percent of load while grinding whilst also showing total running hours of the machine.
- Easy fold down handles for transportation.
Diamond Grinding Discs / Diamond Cup Wheels
- Blue/Silver:
- Best for general purpose concrete grinding
- Black:
- Best for very hard concrete surfaces, old high traffic concrete floors (e.g., Industrial warehousing, truck entrance ways)
- Orange:
- Best for coatings, laminates, and paint removal
- Prep Path: 250mm
- Variable Speed: No
- Power Type: Single Phase 10A
- Number of Heads: Single
- Machine Style: Push
- Production Rate: 25-40m2/h
- HVA Meter: Yes
- Tool Diameter: 250mm
- Head RPM: 1440rpm
- HP: 3hp
- Watts: 2.2kw
- Dimensions: 1077mm L x 915mm H x 463mm W
- Total Weight: 62kg
- Max Head Pressure: 28kg
- Noise Rating: 75-85dB(A)
- Dust Port Size: 50mm Push On
- Compatible with S13 Dust Collector Vacuum
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
- Will fit in a station wagon / van
FLOOR DRUM SANDER
NJC Equipment Hire Floor Drum Sanders are designed for sanding wooden floors including parquet to a fine score free finish. Can also be used on a wide range of other surfaces including some types of decking, fibre board, cork, engineered and composition floors. A full range of sand paper grit grades are available as are disposable dust bags.
*Use in conjunction with our Floor Edging Sander
- Rejuvenating timber floors, parquet floors, decking and other timber composition flooring
- Prepare boards before clear coating, lining, carpeting or vinyl
- Suitable for most floor sanding applications
- Sand paper grit available – 36,60,80,100,120
Supplied with a disposable dust bag for simple collection and removal of sanded material - Handle dismounts for easy transportation
- 200mm sanding width
- Multi-speed control panel – four operating speeds.
- High powered vacuum system.
- Polished aluminium alloy body.
- ABS side guards help prevent damage to walls and skirtings.
- Adjustable handle provides ideal height for perfect control and feel.
- 7m power cable with non-marking outer insulation prevents marking of newly sanded floor.
- Weight: 42kg
- Motor Electric: 240V
- Drum Width: 200mm
- Motor: 8,500rpm
- Drum: 3,300rpm
- Eye protection
- Hearing protection recommended
- Mask advised
- Will fit in a stationwagon
FLOOR EDGER SANDER
NJC Equipment Hire Floor Edge Sander will sand hard and soft wood floors, cork and composition floors and any solid wood surface that requires rapid sanding and levelling to a fine finish. Ideal for confined areas such as closets and stair treads where the sander will sand right up to the edge of a floor without damage to the skirting board. Completely self contained with a high efficiency dust pick-up.
*Use in conjunction with our Floor Drum Sander
- Sanding up close to walls / skirting
- Stairs
- Confined spaces
- Rejuvenating timber floors, parquet floors, decking and other timber composition flooring to a smooth finish
- Suitable for most floor sanding applications
- Sand paper grit available – 36,60,80,100,120
- Supplied with a disposable dust bag for simple collection and removal of sanded material
- Biased off switch with power connected indicator light, prevents the HT7 from accidental start-up protecting operator and property.
- Economic handle design minimises fatigue when used over extended periods of time.
- Dust bag support folds upright to provide cable storage.
- 7m power cable with non-marking outer insulation prevents marking of newly sanded floor.
- Wheel castors allow HT7 to glide effortlessly across floor surface allowing easy changes in direction.
- High powered vacuum system
- Weight: 16.4kg
- Motor: 13,000rpm
- Pad: 3,300rpm (off load)
- Sanding Paper: 178mm
- Abrasive: 178mm x 22mm dia circle hole
- Eye protection
- Hearing protection recommended
- Mask advised
- Will fit in the boot of a car
FLOOR STRIPPER
NJC Equipment Hire Makinex Floor Stripper is an industrial grade stripper designed to remove glued down floor coverings such as commercial carpet, gummy adhesives, vinyl tiles, solid vinyl, radial rubber tile, indoor and outdoor sports surfaces and roofing material. It uses double sided blades which can be reversed for either timber or concrete surfaces.
- Removal of vinyl tiles, bitumen, malthoid, grease and dirt build up on timber or concrete surfaces
- Works on concrete and timber floors
- Fast, easy to use
- Handles fold for transportation
- Orbital action, on wheels
- Weight: 48kg (106lbs)
- Removable Weight: 16kg (35lbs)
- Max Length: 917mm (36.1in)
- Max Height: 896mm (35.3in)
- Max Width: 366mm (14.4in)
- Motor: ¾ Horsepower
- Power: 240v
- Eye protection
- Hearing protection recommended
- Mask advised
- Will fit in a stationwagon
TILE SMASHER
NJC Equipment Hire Tile Smasher is the fastest, safest way to remove tiles and thinset! The Tile Smasher Jackhammer Trolley lets you remove ceramic tiles, thinset, cork and vinyl tiles up to six times faster than any other method. Suited to concrete floor substrates. Nothing beats it for speed and efficiency. For timber or other substrates check out our walk behind Floor Stripper.
- Perfect for large areas
- Easily removing tiles from concrete surfaces
- Thinset , mortar, vinyl, cork, ceramic tiles etc
- Options of tile smasher blade or wide chisel attachments
- No bending over holding jackhammer for hours
- Five stops provide the perfect angle of attack
- Foot rest helps you apply forward pressure
- Rubber mounts and bushes absorb vibrations
- Work faster for longer with less fatigue
- One tool removes tile, thinset, vinyl, cork
BREAKER SPECS
- Optional Attachments:
- Tile smasher blade
- Wide chisel attachment
- Shank Type: 30mm Hex
- Blows per minute: 730-1,450ipm
- Joules: 8j
- Overall dimensions: 715mm
- Net weight: 17kg
- Continuous rating input: 1,510W
- Power supply cord: 5m
- Carbon brush: 175
TROLLEY SPECS
- Weight (trolley without jackhammer) 5kg
- Dimensions (trolley without jackhammer) L 1110mm x H 540mm x W 570mm
- Suitable eye protection
- Hearing protection
- Suitable protective mask
- Protective gloves
- Suitable footwear
- Will fit in a stationwagon / ute / van
Vacuum – H Class Dust Collector
NJC Equipment Hire Auckland S13 H class dust collector is a compact industrial H class vacuum with the highest rating in filtration, dust collection and dust free disposal. Can be used as a stand alone vacuum with wand or with smaller equipment for drilling/coring, grinding/polishing, cutting and sanding. This professional dust extractor is an all-around construction vacuum for picking-up a wide range of building materials & debris.
NOTE: This vacuum is not to be used for hazardous material including asbestos and lead paints.
- Can be used as a stand alone vacuum
- Core drilling
- Grinding/polishing
- Demolition cutting
- Drywall sanding
- Construction sites
- Efficient Filtration System – The three separate filtering stages result in longer working time between filter cleaning. The dust is filtered through a cyclone chamber, which separate the heaviest parts, up to 95% of the dust, before the washable main filter. The HEPA micro filters are individual tested & certified to capture 99.99% of the remaining silica dust in the respirable fraction (0.3µm).Easy & Efficient Filter Cleaning – The Jet Pulse filter cleaning system ensures high continuous airflow thanks to easy & efficient cleaning of the conical main filter without opening the machine.High Efficiency Particulate Air Filter – Individually tested & certified HEPA micro filters catching 99.99% of the remaining silica dust in the respirable fraction (0.3µm).Easy-To-Read Airflow Monitoring – Alerts you when the filter needs to be cleaned or changed.For Demanding Industrial Applications – For demanding industrial applications, where high suction & flow are required to eliminate airborne dust.Clean & Simple Bag Change – The Longopac® bag hose system ensures simple changes of the bag without any dust spills.Easy To Transport – The welded frame enables easy transportation by resting the machine on the frame.
- Class: H
- Filtration: HEPA H13
- Phases: Single
- Voltage: 230 V
- Rated Current: 5.2 A
- Max. Vacuum: 220 mbar
- Rated Input Power: 1.2 kW
- Air Requirement: 200 m³/h
- Dimensions: 680mm L x 400mm W x 1100mm H
- Weight: 29kg
- Eye protection
- Hearing protection recommended
- Mask required
- Gloves advised
- Hard hat advised
- Will fit in the boot of your car
Vacuum – Wet / Dry
NJC Wet & Dry Vacuum Cleaners are high performance industrial M Class vacuums that easily handle coating compounds, concrete, concrete cutting slurry, MDF, paper, plastic, composites, etc. Ideal for site clean up after construction activity, spills, flooding and can be used in conjunction with hand tools and grinders for dust extraction. M Class (Medium Hazard) means this vacuum is suitable for working with dust representing a medium risk. The vacuum cleaner filter traps over 99.9 % of dust with a grain size of under 2 microns. Please talk to our team for further information.
NOTE: This vacuum is not to be used for hazardous material including asbestos.
- Wet and dry cleaning
- Removal of slurry during wet coring and cutting applications
- Dust extraction from grinding, cutting, slitting, drilling and dry-coring tools
- Cleaning around sites, factories, homes
- Can be used for cleaning ceilings
- Cleaning construction sites
- Wood dust, paint particles and various metal dusts
- Water
- Wet & dry applications
- Filtration protection class M
- Dust representing a medium risk
- The vacuum cleaner filter traps over 99.9 % of dust with a grain size of under 2 microns
- Consistently high suction
- Handles wide range of materials
- Automatic filter cleaning
- Max. Power Consumption: 1.400 W
- Max. Vacuum Pressure: 250 mbar
- Suction Volume: 4.500 L/min
- Container Volume: 42 L
- Weight: 16kg
- Sound Pressure Level: 68 dB(A)
- Mains Voltage: 220 – 240/1~/50 – 60 V/Hz
- Suction Hose Length: 5 m
- Hose Diameter: 32 mm
- Hearing protection
- Will fit in the boot of your car
WATERBLASTER – 1900PSI ELECTRIC
The NJC Equipment Hire Electric 1900psi Water Blaster is a powerful portable pressure washer with a robust and purposeful design built for tough cleaning tasks including cars, patios, driveways, concrete, exterior house cladding, gutters and more. Featuring a pressure control system to adjust water flow and pressure perfectly, this is a handy portable unit to clean fast.
- Patios
- Around the house
- Cars
- MotorX
- Driveways
- Paths
- Portable
- Powerful
- Long 15m hose
- Steel reinforced high-pressure hose
- Low force grip
- Fan jet nozzle, rotary nozzle, foam sprayer
- Continuous pressure 1900psi
- Max pressure 2300psi /160 bar
- Water flow 470-520 l/h
- Power rating 2400 W
- 15m hose length
- Noise level 92dB
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- Will fit in the boot of your car
WATERBLASTER – 2600PSI PETROL
NJC Equipment Hire Petrol 2600psi Water Blasters are built with quality components to ensure durability in the toughest environments. A High pressure washer, perfect for when power is not accessible and for those tough cleaning jobs such as cleaning machines, vehicles, buildings, exposing concrete aggregate, decks and so on.
- Commercial uses
- Machinery
- Exposing aggregate
- Around the house
- Driveways
- Paths
- Decks
- Portable
- Powerful 2600psi pressure
- 4 Stroke petrol
- 14m hose
- 4 high pressure nozzles
- Continuous pressure 2600 psi
- Maximum pressure 3000 psi
- Flow rate 13.5 ltrs/min
- Honda GX200 6.5hp Petrol engine
- Fuel: 4 Stoke Petrol
- Sturdy frame with removable handle
- Pneumatic tyres
- 4 high pressure nozzles: 0/15/25/40 degrees
- 14m high-pressure hose and gun
- Size: 800mm L x 560mm W x 870mm H
- Weight: 38kg
- Note:
- Requires mains pressure water supply
- Non self priming
- Do not run dry
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- Suitable station wagon, van or ute required
WATERBLASTER – 2500PSI ROTARY WASH
The NJC Equipment Hire Makinex Rotary Wash combines a rotary cleaner and wand pressure washer in the one machine, with the ease of swapping between them at the turn of a handle. The water pressure is fully adjustable from 1000PSI up to 2500PSI.
The versatility of the Makinex Dual Pressure Washer is unparalleled. The portable petrol powered dual washer is perfect for an extensive list of external cleaning applications such as: car parks, driveways, paths, pavements, tennis courts, sports grounds, decks, machinery and more.
- Commercial uses
- Car parks
- Driveways
- Paths
- Decks
- Sports grounds
- Tennis courts
- Machinery and more
- 10m hose
- Easy to operate
- Rubber mounts to reduce vibration from the engine
- Brake castors
- Heavy duty geared pump with thermal release valve
- Lifting eye and foldable handle
- Adjustable 1000psi – 2600psi pressure
- 4 Stroke petrol
- Honda GX200 6.5 Hp Engine
- Noise Level 92dB at handle
- 3.1L fuel tank
- 1000psi to 2600psi
- 10m hose length
- Rotary size 530 mm
- Size: 1137mm L x 552mm W x 730mm H
- Weight: 69 kg
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- Ute or suitable trailer required
WATERBLASTER – 3600PSI TOWABLE
NJC Equipment Hire Heavy Duty 3600psi Trailerised Water Blaster is designed with the contractor in mind. 13 hp Honda powered key start engine, twin hose reels with 30m high and low pressure hose, 500 litre water tank with low water cut-out all combined on a NZ-built galvanised trailer. Portable powerful cleaning!
- Commercial uses
- Machinery
- Exposing aggregate
- Around the house
- Driveways
- Paths
- Decks
- Perfect when power and water isn’t easily available
- Powerful 3600psi pressure
- 4 Stroke petrol
- Twin hose reels
- Easily transported
- Large 500L water tank capacity
- 3600 psi pressure
- Honda EX40 13 hp engine
- Twin hose reels
- 500L water tank
- Float cut out switch
- Galvanised NZ built trailer
- Suitable eye protection
- Hearing protection
- Protective gloves
- Suitable footwear
- Suitable vehicle with rated towbar required
- Please ensure your car is rated to tow this unit
- NJC can deliver if required. Call the team on 0800 652 555
