At NJC Equipment Hire Auckland, we have a range of Heating & Ventilation options available for hire. From heaters to dehumidifiers and an assortment of fans, we have equipment for the job. Need heating & ventilation gear? Get in touch with our experts and talk about your requirements today.
Carpet Fan Blower
NJC Equipment Hire Carpet Fan Blowers are a multipurpose air mover/dryer. This powerful unit is heavy duty and designed to quickly and effectively dry your floors. Large volumes of air are introduced under wet carpets to rapidly dry them preventing mildew setting in. Used in conjunction with our dehumidifiers, moisture content in the room quickly dissipates reducing drying time extensively. Also used to dry out floors, walls, ceilings or where ever you need to quick drying or effective air movement.
- Construction
- Water logged construction materials such as timber framing, linings and insulation
- Renovations
- Water damage
- Drying carpets
- Drying paint
- Walls
- Ceilings
- Drying carpets, walls, bottom plates, doors
- Use in conjunction with NJC Dehumidifiers to greatly speed up drying.
- Lightweight
- Powerful airflow
- Carpet Clamp
- Stack-able up to 3 units
- 3-Speed
- 4 Position Usage (0°, 20°, 45°, 90°)
- Thermal overload protection
- For fast efficient drying, use in conjunction with NJC Dehumidifiers
- Unit Weight: 11.2 kg
- Unit Size: 41 x 45 x 47 cm (L x W x H)
- Rated Airflow: 3200 CFM
- Motor: 1 HP | 700 Watt | 3.0 Amp
- Carpet Clamp
- Stack-able up to 3 units
- 3-Speed
- 4 Position Usage (0°, 20°, 45°, 90°)
- Kickstand
- Carry Handle
- Thermal overload protection
- Tough ABS housing
- Suitable protective mask if mould present
- RCD advised
- Will fit in the boot of your car
- DELIVERY SERVICE AVAILABLE
Dehumidifier
NJC Equipment Hire Dehumidifiers are a fast and efficient way to dry out and remove damp air within a room or space to maintain desired humidity levels to stop mould forming. When used in combination with NJC Hire Carpet Fan Blowers you can greatly speed up the process of drying carpets, walls and furnishings from flooding as well as drying out construction materials such as timber framing, bottom plates and insulation during construction. Talk to our team today about how we can sort your project with our range of dehumidifiers, fans, heaters and wet / dry vacuums.
- Water logged construction materials such as timber framing, linings and insulation
- DIY excess water and flooding
- Removing moisture in air causing mould
- Maintaining required humidity levels
- Drying carpets, walls, bottom plates, doors
- Water damage
- Use in conjunction with NJC Carpet Fan Blowers to greatly speed up drying.
- Stackable
- Compact yet powerful
- Removes up to 63 ltrs per day
- Automatic humidistat is set and maintains desired humidity level
- Features an automatic pump with extension drain hose
- Quiet operation and low power consumption
- Control panel displays inlet and outlet temp and RH in real time.
- Best low-humidity performance in its class.
- Precision control technology – auto adjusts to maximise removal rate.
- Use with NJC Hire Carpet Fan Blowers for greater efficiency.
- Dimensions: L 456mm x W 318mm x H 457mm
- Weight: 30kg
- Amps: 3.4amps at 26.7’C/60% RH
- Water removal: 39L per day
- Secure, compact stacking
- Easiest to transport multiple units on a handtruck
- Performs as a “large” dehu yet fits where others don’t – lofts, bathrooms, kitchens, etc.
- Fastest access for cleaning and maintenance
- Control panel displays inlet and outlet temp and RH in real time.
- Best low-humidity performance in its class.
- Precision control technology – auto adjusts to maximise removal rate.
- Suitable protective mask if mould present
- RCD advised
- Will fit in the boot of your car
- Station wagon or larger for multiple units
- DELIVERY SERVICE AVAILABLE
FAN – EXHAUST 300MM
NJC Equipment Hire portable 300mm Exhaust Fans for extracting or blowing large volumes of air efficiently and effectively. Great for removing odour, dust and waste gas in confined spaces. For use in warehousing, electric soldering, tunnels, basements, laboratories, shipping & logistics facilities, decorating, advertising and promotional events.
- 300mm ducting available as an add on.
- Extraction of fumes and waste air from an area
- When fans are reversed, can be used to suck clean air into work areas or confined spaces
- Moving large volumes of air
- Great for confined spaces, workshops, construction sites, labs, basements & more
- Can be used with ducting to channel air, dust and fumes away from work areas
- High performance fully enclosed motor
- Safety grills
- Thermal fuse for safety operation
- Plastic handle for easy moving and best insulation
- IP55 rated
- 240v
- Optional 5m Flexi duct attachment
- Model: CTF-30
- Impeller Size: 300mm
- Dimensions: 380mm W x 450mm H x 380mm D
- Weight: 10kg
- Voltage: 240V / 50Hz
- Input Power: 520W
- Current: 2.7 Amps
- Speed: 2,800rpm
- Air Volume: 65m3 per min
- Protective mask required when operating
- Suitable eye protection
- Hearing protection
- Will fit in the boot of your car
- DELIVERY SERVICE AVAILABLE
FAN DUCTING 300MM
NJC Equipment Hire heavy duty 5m ducting that fits our 300mm Portable Exhaust Fans. Great for removing waste air away from confined spaces or pushing clean air into work areas.
- Use with 300mm exhaust fan to channel waste air away from areas
- When fans are reversed, can be used to suck clean air into work areas or confined spaces
- Great for confined spaces, workshops, construction sites, labs, basements & more.
- Heavy duty
- Industrial grade
- Easily joined
- High tensile wire reinforced
- Hanging hooks fitted
- Model: CTD-30
- Fits: CTF-30
- Diameter: 300mm
- Length: 5m
- Protective mask required when operating Fans
- Suitable eye protection
- Will fit in the boot of your car
- DELIVERY SERVICE AVAILABLE
FAN – EXHAUST 700MM
NJC Equipment Hire 700mm Exhaust Fans for extracting or blowing large volumes of air efficiently and effectively. Great for removing odour, dust and waste gas in confined spaces. For use in warehousing, electric soldering, tunnels, basements, laboratories, shipping & logistics facilities, decorating, advertising and promotional events.
- Extraction of fumes and waste air from an area
- When fans are reversed, can be used to suck clean air into work areas or confined spaces
- Moving large volumes of air
- Great for confined spaces, workshops, construction sites, labs, basements & more
- High performance fully enclosed motor
- Safety grills
- Thermal fuse for safety operation
- Plastic handle for easy moving and best insulation
- Equipped with heavy duty wheels and adjustable angle for easy mobility and set-up
- IP55 rated
- 240v
- Model: CTF-70
- Impeller Size: 700mm
- Dimensions: 880mm W x 1020mm H x 600mm D
- Weight:
- Voltage: 240V / 50Hz
- Input Power: 2,200W
- Current: 2.7 Amps
- Speed: 1,400rpm
- Air Volume: 310m3 per min
- Protective mask required when operating
- Suitable eye protection
- Hearing protection
- Ute, van or trailer required
- DELIVERY SERVICE AVAILABLE
FAN DUCTING 700MM
NJC Equipment Hire heavy duty 5m ducting that fits our 700mm Portable Exhaust Fans. Great for removing waste air away from confined spaces or pushing clean air into work areas.
- Use with 700mm exhaust fan to channel waste air away from areas
- When fans are reversed, can be used to suck clean air into work areas or confined spaces
- Great for confined spaces, workshops, construction sites, labs, basements & more.
- Heavy duty
- Industrial grade
- Easily joined
- High tensile wire reinforced
- Hanging hooks fitted
- Model: CTF-70
- Fits: 700mm Fans
- Diameter: 700mm
- Length: 5m
- Protective mask required when operating Fans
- Suitable eye protection
- Will fit in the boot of your car
- DELIVERY SERVICE AVAILABLE
Heater – Infrared Diesel – Small
NJC Equipment Hire Small Infrared Diesel Heaters provide a dependable, safe, instant radiant heat for workshops, construction sites, farms, garages, functions and parties or any outdoor heating need. Supplied with heat shielding mat.
- WARNING:
- Please follow safety instructions
- Heater must be attended at all times
- Heat shield pack must be used to prevent damage or fire on any combustible surfaces such as wooden floors, painted concrete floors
- Factories
- Open workshops
- Outdoor entertaining areas
- Construction sites
- Parties
- Drying of paint or adhesives
- Concrete and asphalt preparation
- Easy to use
- Compact and efficient
- Noise: 71dBA at 1m – Approx. 50% noise reduction versus a typical forced air heater
- Cleaner combustion for better air quality
- Heat Output: 70,000 BTU silent drive radiant heating
- Heating Area: 162m2
- 21kW Heating
- Tank Capacity: 15L
- Operating Hours: 6hrs
- Safe & economical – auto shut-off if power is interrupted or flame is extinguished
- Dimensions LxWxH: 510mm x 340mm x 540mm
- Weight: 13kg
- Supplied with heat shield mat
- Heat Output: 70,000 BTU silent drive radiant heating
- Heating Area: 162m2
- 21kW Heating
- Tank Capacity: 15L
- Fuel Type: Diesel
- Operating Hours: 6hrs
- Dimensions: (LxWxH) 510mm x 340mm x 540mm
- Weight: 13kg
- Fuel consumption: 2ltr p/h
- Noise: 71dBA at 1m
- Power Source: Single phase
- Safety: Auto shut-off if power is interrupted or flame is extinguished
- Cool down cycle
- Must use in well ventilated areas
- When refuelling:
- Protective gloves advised
- Eye protection
- WARNING:
- Please follow all safety procedures and instructions
- Will fit in car boot or station wagon
- DELIVERY SERVICE AVAILABLE
Heater – Infrared Diesel (Val6)
NJC Equipment Hire Val6 Diesel Heaters are versatile and portable for commercial and industrial applications. They are odourless when operating and able to transfer heat evenly without any loss of efficiency from wind or cold air. Safety features include a tip over sensor and an over-voltage detector. This heater is ideal for factories, construction sites, events and drying. Supplied with heat shielding mat.
- WARNING:
- Please follow safety instructions
- Heater must be attended at all times
- Heat shield pack must be used to prevent damage or fire on any combustible surfaces such as wooden floors, painted concrete floors
- Factories
- Open workshops
- Outdoor entertaining areas
- Construction sites
- Parties
- Drying of paint or adhesives
- Concrete and asphalt preparation
- Efficient diesel burner with extensive running time
- 10-11 hour apporx run time (dependent on conditions)
- Large, direct heating surface
- Fan-forced for maximum efficiency
- Safety Devices: Photocell flame monitor 3A fuse
- Tip-Over Sensor
- Adjustable disk angle tilts upward 20 degrees
- Supplied with heat shield mat
- Heat Output: 112000 BTU/hr
- Fuel: Diesel
- Tank Capacity: 35 ltrs
- Power Source: 240 V 50 Hz
- Fuel consumption: 2.67 kg/h
- Operating Hours: 10-11 hrs approx (dependent on conditions)
- Power Consumption: 60 W
- Safety Devices: Photocell flame monitor 3A fuse
- Tip-Over Sensor
- Adjustable Disk Angle Tilts upward 20 degrees
- Must use in well ventilated areas
- When refuelling:
- Protective gloves advised
- Eye protection
- WARNING:
- Please follow all safety procedures and instructions
- Station wagon or ute required
- DELIVERY SERVICE AVAILABLE
Heater – Space Heater Diesel
NJC Equipment Hire Indirect Space Heater is ideal for heating large spaces including marquees, commercial warehouses and garages. The unit has an automatic oil burner, a Danfoss pump and added safety features such as an electronic flame control, a safety thermostat and an electronic control panel. Can be used in well ventilated areas without ducting. If to be used in closed environments, ducting can be fitted to the unit positioned outdoors enabling heating of the space inside without any fumes
- WARNING:
- Please follow safety instructions
- Marquees
- Factories and workshops
- Outdoor entertaining areas
- Construction sites
- Parties
- Drying of paint
- Clean, immediate and economical heat for all uses
- Heat exchanger with flue union to expel fumes
- Thermal efficiency of 89%
- Typical Heated Area: 710 cubic meters
- Portable with a handle, trolley and wheels
- Simple to use control panel
- Practical fuel filler
- Electronic control panel
- Electronic flame control device
- Safety thermostat
- Thermostatically controlled
- Optional ducting
- Heating Capacity: 51kw / 174000 Btu/hr
- Weight: 81kg
- Dimensions: 94cm x 55cm x 143cm
- Airflow: 2500m³/hr
- Fuel Consumption: 4.6 litres/hr
- Fuel Type: Diesel
- Tank Capacity: 65 litres
- Thermal Efficiency: 89.5%
- Noise: 74d(B)A rating
- Ducting Length: 6m
- Ducting Diameter: 356mm
- Dual Duct Adapter: Sourced on request
- Must use in well ventilated areas if unit is indoors otherwise outside with ducting.
- When refuelling:
- Protective gloves advised
- Eye protection
- WARNING:
- Please follow all safety procedures and instructions
- Van or ute required
- DELIVERY SERVICE AVAILABLE
