HEATING, VENTILATION & VACS

At NJC Hire, we have a range of Heating, Ventilation and Wet / Dry Vacuums available for hire. Get in touch with our experts and talk about your requirements today.

Carpet Fan Blower

Multipurpose Air Mover/Dryer. Tough ABS Plastic Housing. This powerful unit is Heavy Duty and designed to quickly and effectively dry your floors. Large volumes of air are introduced under wet carpets to rapidly dry them preventing mildew setting in. Used in conjunction with a dehumidifier, moisture content in the room quickly dissipates reducing drying time extensively Also used to dry out floors, walls, ceilings.

  • Construction
  • Renovations
  • Water damage
  • Drying carpets
  • Drying paint
  • Walls
  • Ceilings
  • Lightweight
  • Powerful airflow
  • Carpet Clamp
  • Stack-able up to 3 units
  • 3-Speed
  • 4 Position Usage (0°, 20°, 45°, 90°)
  • Thermal overload protection
  • Unit Weight: 11.2 kg
  • Unit Size: 41 x 45 x 47 cm (L x W x H)
  • Rated Airflow: 3200 CFM
  • Motor: 1 HP | 700 Watt | 3.0 Amp
  • Carpet Clamp
  • Stack-able up to 3 units
  • 3-Speed
  • 4 Position Usage (0°, 20°, 45°, 90°)
  • Kickstand
  • Carry Handle
  • Thermal overload protection
  • Tough ABS housing
  • Suitable protective mask if mould present
  • RCD advised
  • Will fit in the boot of your car
Carpet Fan ManualCall 0800 652 555

Delivery Service Available

Dehumidifier

A small dehumidifier to maintain desired humidity levels and remove damp air within a room to stop mould forming. Blower dryers should be used in conjunction with dehumidifiers to speed up the process of drying carpets, furnishings and flooring from flooding.

  • Construction
  • DIY
  • Removing moisture in air causing mould
  • Maintaining required humidity levels
  • Drying carpets aUse in conjunction with Carpet fans
  • Water damage
  • Stackable
  • Compact yet powerful
  • Removes up to 63 ltrs per day
  • Automatic humidistat is set and maintains desired humidity level
  • Features an automatic pump with extension drain hose
  • Quiet operation and low power consumption
  • Control panel displays inlet and outlet temp and RH in real time.
  • Best low-humidity performance in its class.
  • Precision control technology – auto adjusts to maximise removal rate.
  • Dimensions: L 456mm x W 318mm x H 457mm
  • Weight: 30kg
  • Amps: 3.4amps at 26.7’C/60% RH
  • Water removal: 39L per day
  • Secure, compact stacking
  • Easiest to transport multiple units on a handtruck
  • Performs as a “large” dehu yet fits where others don’t – lofts, bathrooms,  kitchens, etc.
  • Fastest access for cleaning and maintenance
  • Control panel displays inlet and outlet temp and RH in real time.
  • Best low-humidity performance in its class.
  • Precision control technology – auto adjusts to maximise removal rate.
  • Suitable protective mask if mould present
  • RCD advised
  • Will fit in the boot of your car
  • Station wagon or larger for multiple units
Call 0800 652 555

Delivery Service Available

Heater – Diesel

Our diesel heaters are versatile and portable for commercial and industrial applications. They are odourless when operating and able to transfer heat evenly without any loss of efficiency from wind or cold air. Safety features include a tip over sensor and an over-voltage detector. This heater is ideal for factories, construction sites, events and drying.

  • WARNING:
    • Please follow safety instructions
    • Heater must be attended at all times
    • Heat shield pack must be used to prevent damage or fire on any combustible surfaces such as wooden floors
  • Factories
  • Open workshops
  • Outdoor entertaining areas
  • Construction sites
  • Parties
  • Drying of paint or adhesives
  • Concrete and asphalt preparation
  • Efficient diesel burner with extensive running time
  • Large, direct heating surface
  • Fan-forced for maximum efficiency
  • Safety Devices: Photocell flame monitor 3A fuse
  • Tip-Over Sensor
  • Adjustable disk angle tilts upward 20 degrees
  • WARNING:
    • CANNOT BE LEFT UNATTENDED
    • Heat shield pack for use on surfaces other than concrete ie; wooden floors
  • Heat Output: 112000 BTU/hr
  • Fuel: Diesel
  • Tank Capacity: 35 ltrs
  • Power Source: 240 V 50 Hz
  • Fuel consumption: 2.67 kg/h
  • Power Consumption: 60 W
  • Safety Devices: Photocell flame monitor 3A fuse
  • Tip-Over Sensor
  • Adjustable Disk Angle Tilts upward 20 degrees
  • Must use in well ventilated areas
  • When refeulling:
    • Protective gloves advised
    • Eye protection
  • WARNING:
    • Please follow safety instructions
    • Heater must be attended at all times
    • Heat shield pack must be used to prevent damage or fire on any combustible surfaces such as wooden floors
  • Station wagon or ute required
Call 0800 652 555

Delivery Service Available

Wet / Dry Vacuum

Wet and dry vacuum cleaners with automatic switch-on function in Dust Class M. This high performance M class industrial vacuum features an automatic filter cleaner which maintains suction, even when dealing with fine dust. M Class (Medium Hazard) mean this vacuum is suitable for working with dust representing a medium risk. The vacuum cleaner filter traps over 99.9 % of dust with a grain size of under 2 microns. It will easily handle coating compounds, concrete, MDF, paper, plastic, composites, etc. It is ideal for site clean up after construction activity, spills, flooding and can be used in conjunction with hand tools and grinders for dust extraction.

NOTE: This vacuum is not to be used for hazardous material including asbestos.

  • Wet and dry cleaning
  • Removal of slurry during wet coring applications
  • Dust extraction from grinding, cutting, slitting, drilling and dry-coring tools
  • Cleaning around sites, factories, homes
  • Can be used for cleaning ceilings
  • Cleaning construction sites
  • Wood dust, paint particles and various metal dusts
  • Wet & dry applications
  • Filtration protection class M
    • Dust representing a medium risk
    • The vacuum cleaner filter traps over 99.9 % of dust with a grain size of under 2 microns
  • Consistently high suction
  • Handles wide range of materials
  • Automatic filter cleaning
  • Max. power consumption: 1.400 W
  • Maximum vacuum pressure: 250 mbar
  • Suction volume: 4.500 L/min
  • Container volume: 42 L
  • Weight: 16kg
  • Sound pressure level: 68 dB(A)
  • Mains voltage: 220 – 240/1~/50 – 60 V/Hz
  • Suction hose length: 5 m
  • Hose diameter: 32 mm
  • Hearing protection
  • Will fit in the boot of your car
Call 0800 652 555

Delivery Service Available